Autoclave Kevlar phone shell - Manufacturers, Factory, Suppliers from China

Composite materials composed of carbon fiber and epoxy resin have become an advanced aerospace material due to their small specific gravity, good rigidity and high strength. Because every kilogram of the weight of the space vehicle is reduced, the launch vehicle can be reduced by 500 kilograms. Therefore, there is a race to adopt advanced composite materials in the aerospace industry. There is a vertical take-off and landing fighter, and the carbon fiber composite material used in it has accounted for 1/4 of the weight of the whole aircraft and 1/3 of the weight of the wing. According to reports, the key components of the three rocket thrusters on the US space shuttle and the advanced MX missile launch tube are all made of advanced carbon fiber composite materials. Autoclave Kevlar phone shell, Carbon Fiber Drill, Cnc Machining Carbon Fiber, Rectangular Carbon Fiber Tube,Composite Plate. The X-ray transmittance of carbon fiber medical panels is also particularly high, which can be as high as 96% or more. When it is made into a foam sandwich structure, compared with traditional plywood medical boards and phenolic resin medical boards, in addition to better load-bearing capacity, less radiation consumption and clear imaging; reducing X-ray damage to patients, It is also convenient for doctors to diagnose. Carbon fiber composite materials have a high degree of freedom in design, which is different from metal materials. Generally, the strength of metal materials is given, and carbon fiber medical boards can play better effects according to reasonable design. For example, the carbon fiber medical board has a single direction of force. We can use the method of unidirectional layering to maximize the strength in this direction. The product will supply to all over the world, such as Europe, America, Australia,Guatemala, Myanmar,Washington, South Korea.Carbon Fiber Forming: Carbon fiber sheets made of epoxy glue are not thermoset (thermoformable) - the finished sheet cannot be heated and bent to maintain the bent shape. Carbon fiber laminate does not stretch easily like plastic. You can get very insufficient permanent index of refraction in an orientation above high fever, but because of this difficulty, we do not strongly recommend the application. Molded pieces are possible, but the carbon fiber fabric must be stored in the mold and the epoxy glue introduced prior to the heating/drying process.

Related Products