Blue Carbon Fiber Plate - China Manufacturers, Suppliers, Factory

Carbon fiber was produced in the early 1950s in response to the needs of cutting-edge science and technology such as rockets, aerospace and aviation, and is now widely used in sports equipment, textiles, chemical machinery and medicine. With the increasingly stringent requirements of cutting-edge technology on the technical performance of new materials, scientific and technological workers are constantly striving to improve. In the early 1980s, high-performance and ultra-high-performance carbon fibers appeared one after another, which was another leap in technology, and also marked that the research and production of carbon fibers had entered an advanced stage.​​ Blue Carbon Fiber Plate, Carbon Fiber Tube Accessories, Large Carbon Fiber Tubes, Carbon Fiber Rc Frame,3k Carbon Fiber Tube. The amount of carbon fiber used in the production of carbon fiber tubes and the modulus of carbon fiber are directly related to the physical properties and strength performance of carbon fiber tubes. In general, the tensile strength of carbon fiber tubes can reach more than 3000mpa, which is 10 times that of steel. The above, but its weight is less than 1/4 of that of steel with the same volume. Therefore, the distinctive feature of carbon fiber tube is light weight and high strength, and it has the reputation of "material" since its inception. The product will supply to all over the world, such as Europe, America, Australia,French, Angola,Norway, Oslo.In general, grinding and filing can grind the edges of sharp carbon fiber boards to a smooth appearance. However, if the fiberboard is exposed to harsh environments for a long time, such as marine environments, a two-part epoxy laminate is used to seal the edges.According to the different divisions of carbon fiber precursors, there are generally pitch-based carbon fiber cloth, PAN-based carbon fiber cloth, and viscose-based carbon fiber cloth.Second, according to different specifications, it can be divided into 1K, 3K, 6K, 12K and 24K and above carbon fiber cloth.Third, according to different carbonization, it can also be divided into graphitized carbon fiber cloth, (this carbon fiber cloth can withstand high temperature of 2,000 to 3,000), carbon fiber cloth (can cope with high temperature of about 1,000 degrees), and pre-oxidized carbon fiber cloth (can Resist the high temperature of 200~3 Baidu).Fourth, according to different manufacturing methods, subsequent divisions can be performed. Woven carbon fiber cloth, generally two-dimensional cloth, three-dimensional cloth and three-dimensional woven cloth, etc.; carbon fiber prepreg cloth, including dry and wet prepreg cloth; carbon fiber non-woven fabric, non-woven fabric, also known as chopped strand mat, Continuous felt, surface felt, stitched felt, etc.

Related Products