Carbon Fiber Desktop - Manufacturers, Suppliers, Factory from China

In the automotive industry, carbon fiber sheets are used to strengthen automotive components such as doors, hoods, bumpers, fenders and roof rails. Automakers often use steel to make these parts. Although less expensive, steel is much heavier than carbon fiber. To make vehicles such as race cars lighter, carbon fiber sheets are often used to replace many steel parts. Carbon Fiber Desktop, Cnc Composite, Carbon Fiber Sup Paddle, Carbon Fiber Wheel Plate,Composite Rc Frame. Carbon fiber can be divided into polythiophene-based carbon fiber, bitumen-based carbon fiber, viscose-based carbon fiber, phenolic resin-based carbon fiber, and gas chromatography-grown carbon fiber according to the source of raw materials; Model and very high solid model carbon fiber; divided into long filament, short fiber and chopped fiber according to the situation; divided into general-purpose and high-performance type according to structural mechanical properties. Universal carbon fiber has a strength of 1000Mpa and a modulus of up to 100GPa. High-performance carbon fiber is divided into high-strength type (strength 2000Mpa, modulus 250GPa) and high solid model (modulus above 300GPa). Those whose strength exceeds 4000Mpa are also called ultra-high-strength models; those whose modulus exceeds 450Gpa are called extremely high solid models. Along with the development trend of the aerospace and aerospace industries, high-strength and high-elongation carbon fibers have also been produced, with a tensile strength of more than 2%. The product will supply to all over the world, such as Europe, America, Australia,Czech, United Arab emirates,Singapore, Myanmar.Cutting Carbon Fiber Laminates: Carbon fiber plastic sheets can be cut with standard tools ranging from scissors and razor blades to thinner plastic sheets, milled cut-off wheels and dremel tools. For cutting many carbon fiber double plates, we propose to use carbide cutting tools, wear-resistant material type cutting machines or diamond film-forming tools. Basic steel tools can cut carbon plates, but because of the breakage characteristics of all aluminum alloy plates, standard tools can quickly break down in extra-heavy cutting applications. The control panel can then be simply sanded and polished, allowing you to trim the close and sanded edges to final specifications to maintain a clean, uncluttered edge.

Related Products