Carbon Fiber Folding Table - China Factory, Suppliers, Manufacturers

Composite materials composed of carbon fiber and epoxy resin have become an advanced aerospace material due to their small specific gravity, good rigidity and high strength. Because every kilogram of the weight of the space vehicle is reduced, the launch vehicle can be reduced by 500 kilograms. Therefore, there is a race to adopt advanced composite materials in the aerospace industry. There is a vertical take-off and landing fighter, and the carbon fiber composite material used in it has accounted for 1/4 of the weight of the whole aircraft and 1/3 of the weight of the wing. According to reports, the key components of the three rocket thrusters on the US space shuttle and the advanced MX missile launch tube are all made of advanced carbon fiber composite materials. Carbon Fiber Folding Table, Carbon Fiber Tripod, Carbon Fiber Cutting Part, Cut Carbon Fiber,Drill Carbon Boom. The specific disadvantage of carbon fiber is that it has poor impact resistance and is very easy to damage. Air oxidation occurs under the effect of strong alkali. The induced electromotive force of carbon fiber is coincident, while the induced electromotive force of aluminum alloy profiles is negative. When the carbon fiber composite material is used in combination with the aluminum profile, the carbonization, nitriding and electrochemical reaction of the metal material will occur. Therefore, carbon fiber must be surface treated before application. The product will supply to all over the world, such as Europe, America, Australia,Guyana, Slovenia,Kazakhstan, Houston.Carbon Fiber Forming: Carbon fiber sheets made of epoxy glue are not thermoset (thermoformable) - the finished sheet cannot be heated and bent to maintain the bent shape. Carbon fiber laminate does not stretch easily like plastic. You can get very insufficient permanent index of refraction in an orientation above high fever, but because of this difficulty, we do not strongly recommend the application. Molded pieces are possible, but the carbon fiber fabric must be stored in the mold and the epoxy glue introduced prior to the heating/drying process.

Related Products