banner-03

Carbon Fiber Keyboard Case - Manufacturers, Suppliers, Factory from China

The molding methods of carbon fiber products mainly include two ways: First, the molding process, the molding is to place the carbon fiber material between the upper and lower molds, under the action of the pressure and temperature of the hydraulic press, the material fills the mold cavity and removes the residual Air, after a period of high temperature and high pressure, solidifies the resin in the carbon fiber material, and a carbon fiber product can be obtained after demolding. This process greatly reduces the production cost, and has high production efficiency, and is suitable for forming carbon fiber products with complex structures. Second, the autoclave forming process, the autoclave is a special container that can withstand and adjust the stability and pressure within a certain range. The carbon fiber prepreg is laid on the surface of the mold coated with mold release agent, and then covered with mold release cloth, suction felt, isolation film, and air felt in turn, sealed in a vacuum bag, and heated and cured in an autoclave. Before, it needs to be vacuumed to check the tightness, and then put into an autoclave for curing and molding under the action of high temperature and high pressure. This process is suitable for load-bearing structural parts that require high mechanical properties. Carbon Fiber Keyboard Case, Hexagon Carbon Fiber Tube, Carbon Fiber Race Car Parts, Carbon Fiber Gift,Making Carbon Fiber Sheets. The specific disadvantage of carbon fiber is that it has poor impact resistance and is very easy to damage. Air oxidation occurs under the effect of strong alkali. The induced electromotive force of carbon fiber is coincident, while the induced electromotive force of aluminum alloy profiles is negative. When the carbon fiber composite material is used in combination with the aluminum profile, the carbonization, nitriding and electrochemical reaction of the metal material will occur. Therefore, carbon fiber must be surface treated before application. The product will supply to all over the world, such as Europe, America, Australia,Afghanistan, Bolivia,Malawi, Bulgaria.Carbon fiber tube production process and characteristics

Related Products

carbon fiber phone holder

Top Selling Products

Send your message to us:

Write your message here and send it to us