Cnc Composite - Factory, Suppliers, Manufacturers from China

2. Low thermal expansion coefficient. A low coefficient of expansion is beneficial for improving the accuracy of the company's products. Cnc Composite, Carbon Fiber Construction, Large Carbon Fiber Sheets, Drill Carbon Boom,Carbon Fiber Round Tube. Carbon fiber products are very light-weight materials. Compared with the same volume of plates, the steel plate material is 4 times heavier than the carbon fiber material. It is precisely because carbon fiber is strong and durable that it is used in many places and is loved by major businesses and people. Let me tell you about the specific performance of the durability of carbon fiber products. 1. Thermal properties. Carbon fiber products can withstand temperatures of thousands of degrees Celsius, so they can be used to make rocket thrusters and some electronic devices that generate high temperatures during operation, and carbon fiber is also a conductive material. 2. Mechanical properties. Ordinary materials are generally heavier, the higher the strength, so that the ability to withstand impact is higher. Carbon fiber products are very light in weight and high in strength. Using them in airplanes or cars can not only reduce weight, but also increase their speed and save fuel. It can also make cars stronger and more reliable. driver's safety. 3. Chemical properties. Carbon is an element with very stable chemical properties. The carbon content in carbon fiber is as high as 90%, so it has good corrosion resistance. Even if it is used in the sea for a long time for decades, there will be no problems. There is no need to worry about carbon fiber products. Rusty condition. 4. Other properties. Carbon fiber products are healthy and non-toxic, and have good penetrating ability to X-rays. Using them on medical bed boards can reduce the side effects caused by radiation and make the imaging clearer. Carbon fiber products have good performance and long service life. The product will supply to all over the world, such as Europe, America, Australia,Burundi, Macedonia,Burundi, Slovakia.The surface of the wound carbon fiber prepreg must be coated with a layer of OPP, and then the wound carbon fiber tube is sent to a high-temperature curing furnace to dry and form, and finally the mold is released, and the unstable parts on both sides are cut off to carry out production and processing solutions.

Related Products