Cut Cnc - Manufacturers, Factory, Suppliers from China

At this stage, many product parts are made of carbon fiber. Most parts are not standard plate and tube products. In the application environment, there are some inclination and shape regulations. Carbon fiber composite materials have good ductility, and epoxy resin can complete various intricate shapes in the flow of the mold. At this stage, the customized industry has a very large demand for such special-shaped parts. Some customers do not understand the basic knowledge of the production and application of carbon fiber special-shaped parts. Cut Cnc, Rc Composite Frame, Cnc Cutting Service, Carbon Fiber Boom,Design Carbon Fiber. The production process of carbon fiber tubes is different, and the strength of the products produced is also different. Taking T700 carbon fiber and resin as raw materials and a carbon fiber tube made by winding molding process as an example, the carbon fiber tube with a size of 1.6*50*500mm is tested, and it can be found that the average compressive strength of the carbon fiber tube can reach 230MPa, which will occur when the load is exceeded. Brittle failure, the strength of the matrix determines the strength of the carbon fiber tube.In the tensile strength test of the carbon fiber tube, it was found that the carbon tube can withstand a tensile strength of more than 800MPa, and the maximum strain is 0.03, and the tensile resistance of the carbon tube is very good.Carbon fiber composite materials have many advantages such as light weight and high strength. Carbon fiber tubes can be made by winding, rolling, and pultrusion. The product will supply to all over the world, such as Europe, America, Australia,Birmingham, Russia,Brasilia, Suriname.Molded carbon fiber square tube: The carbon fiber square tube is turned into a rectangular tube, and the prepreg layer is carried out through a rectangular mold. First, according to the size of the square tube, the mold is made, and the prepreg is cut, and then layer by layer. Lay the carbon fiber prepreg on top of the square tube, each layer of prepreg can complete a circle of the square tube, after the layup is completed, the mold is clamped and fixed, and then sent to the curing equipment to complete the curing, and so on. After that, the mold is disassembled, and the core mold is demolded to obtain a carbon fiber square tube.

Related Products