Carbon fiber processing, how are carbon fiber products processed

Broken fiber material is a kind of composite material with very high performance. While inheriting the high performance advantages of carbon fiber materials very well, it also has the performance of matrix materials very well. This is also the performance advantage that many composite materials have. It can It is very good to inherit the advantages of several composite materials. We are a professional manufacturer of carbon fiber products. This article will talk about the relevant knowledge of carbon fiber processing to better understand carbon fiber products.

In the production of carbon fiber products, our production process is to first determine the size of the product according to the customer’s product needs, and then carry out corresponding customized production according to the drawings of our fiber products to see how many raw materials are needed, and then give a certain amount. In the production of carbon fiber products, the raw material of the fiber composite material is selected according to the performance requirements, and then the prepreg is carried out according to the initially designed layer, and the corresponding layer is cut and layered, usually using O, ± 45′, 90 angle lay-up method, and complete the production of carbon fiber products according to the method of initial design. In the production and processing of carbon fiber products, the most important thing is the communication of details.

Four processing methods of carbon fiber:

1. Grinding, grinding is to make the overall precision of carbon fiber products better meet the precision requirements, such as the surface precision of carbon fiber plates, which can make the flatness better.

2. Drilling. Drilling is to drill holes on the carbon fiber product through a tool to better complete the assembly requirements, including some that require nuts to be threaded to complete the assembly. It is also necessary to drill holes first, so the drilling method is required here. The requirements for the cutter head are relatively high here, and there is a layering situation during the processing of the rabbit, which needs to be paid attention to.

3. Turning, turning is basically the processing of carbon fiber products, in order to make the overall size of carbon fiber products better meet the requirements, and most of the large-size products are cut at a large angle.

4. Milling, milling is more of a correction processing method, which is mostly a correction processing method for some products, and attention should be paid to avoid burrs or delamination during the processing.

Then in carbon fiber processing, we will find that when carbon fiber is processed, the requirements for the cutting tool are very high. It is necessary to ensure that the cutting tool is sharp, and then it is not easy to have burrs and delamination during processing. Regarding the purchase of carbon fiber products, we are a manufacturer specializing in the production of carbon fiber products. We have ten years of rich experience in the field of fiber breaking. We are engaged in the production and processing of carbon fiber products. We have complete molding equipment and perfect processing machines. Complete the production of various types of broken fiber products, and customize the production according to the drawings. The carbon fiber board products produced are also exported to many industries, and have been unanimously recognized and praised.