Cutting Carbon Fiber - China Factory, Suppliers, Manufacturers

Carbon fiber and carbon fiber tube have different pressure capacity. Why are carbon fiber and carbon fiber tubes different in pressure? This is because carbon fiber is not the same as carbon fiber composite material. Carbon fiber composite material is an intermediate material that is fused with carbon fiber and resin. In terms of performance, carbon fiber is much higher than carbon fiber composite materials, but carbon fiber cannot be used as a material alone. 1. Carbon fiber pressure bearing capacity: The tensile strength of carbon fiber material is 3530MPa, 1MPa=1N/mm2, which is 3530N/mm2, which means that it can withstand a force of 3530 Newtons on a cross section of 1 square millimeter, which is 353Kg. 2. The pressure-bearing capacity of carbon fiber composite materials: the carbon fiber tube with T700 grade, 1.6mm thickness, 50mm inner diameter and 500mm length is used for testing, and the measured tensile strength is about 230MPa, that is, the cross section of 1 square millimeter bears a force of 230 Newtons , which is 23Kg. Cutting Carbon Fiber, Carbon Fiber Battery Brace, Carbon Fiber Rectangular Rod, Large Carbon Fiber Panels,Composite Frame. The X-ray transmittance of carbon fiber medical panels is also particularly high, which can be as high as 96% or more. When it is made into a foam sandwich structure, compared with traditional plywood medical boards and phenolic resin medical boards, in addition to better load-bearing capacity, less radiation consumption and clear imaging; reducing X-ray damage to patients, It is also convenient for doctors to diagnose. Carbon fiber composite materials have a high degree of freedom in design, which is different from metal materials. Generally, the strength of metal materials is given, and carbon fiber medical boards can play better effects according to reasonable design. For example, the carbon fiber medical board has a single direction of force. We can use the method of unidirectional layering to maximize the strength in this direction. The product will supply to all over the world, such as Europe, America, Australia,South Africa, Lithuania,San Diego, Serbia.Carbon Fiber Forming: Carbon fiber sheets made of epoxy glue are not thermoset (thermoformable) - the finished sheet cannot be heated and bent to maintain the bent shape. Carbon fiber laminate does not stretch easily like plastic. You can get very insufficient permanent index of refraction in an orientation above high fever, but because of this difficulty, we do not strongly recommend the application. Molded pieces are possible, but the carbon fiber fabric must be stored in the mold and the epoxy glue introduced prior to the heating/drying process.

Related Products