Good quality Composite Cnc - T700/T300 3K Full Carbon Fiber Sheet – Feimoshi
Good quality Composite Cnc - T700/T300 3K Full Carbon Fiber Sheet – Feimoshi Detail:
T700 3K Full Carbon Fiber Sheet
T700S is the highest tensile strength, standard modulus carbon fiber available in the industry. Standard modulus carbon fibers are available in tow sizes from 1K to 24K.
3K is recognized as the most delicate surface for fpv frames.
Our normal stock of sheets including full Carbon Fiber Sheets, Carbon Glass Sheet and G10 Glass Fiber Sheet.
T700 carbon fiber plate, toray carbon fiber, 3k carbon fiber sheets ,Carbon Fiber Sheet Product one of the most pouplar sheets.
Our normal stocked type is Toray T300 full carbon fiber sheet, carbon fiber tube, CNC cutting service, OEM/ODM and logo service.
FAQ
1) Do you make the T300/T700 carbon fiber plate?
Yes, our normal plate is Toray T300 full carbon fiber plate.
2) T700 is stronger than T300?
Normally, T300 plate is strong enough for the FPV drone.
Also some customers perfers the T700 plate. It is up to your choice.
3) Could we do the CNC cutting service?
Yes, CNC cutting, chamfer and countersunk are all ok.
4) How many days for the production time?
About 7-15 working days based on the drawings’ comprehensive.
5) Sample for tesing is avaliable?
Of course, you could make the bulk order. And we will make the free sample for your testing.
Looking for ideal T700 Carbon Fiber Plate Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Toray Carbon Fiber are quality guaranteed. We are China Origin Factory of 3k Carbon Fiber Sheets. If you have any question, please feel free to contact us.
Product detail pictures:
Related Product Guide:
Carbon fiber was produced in the early 1950s in response to the needs of cutting-edge science and technology such as rockets, aerospace and aviation, and is now widely used in sports equipment, textiles, chemical machinery and medicine. With the increasingly stringent requirements of cutting-edge technology on the technical performance of new materials, scientific and technological workers are constantly striving to improve. In the early 1980s, high-performance and ultra-high-performance carbon fibers appeared one after another, which was another leap in technology, and also marked that the research and production of carbon fibers had entered an advanced stage. Good quality Composite Cnc - T700/T300 3K Full Carbon Fiber Sheet – Feimoshi , The product will supply to all over the world, such as: Vancouver, Irish, Saudi Arabia, When cutting carbon fiber board, there are some tips to refer to. When cutting, you can mark it with a tool, and then widen the mark a little bit, so that you can leave enough space to sand the carbon fiber board a little, this way can avoid chips and debris, and make the edge of the carbon fiber board smoother, to further protect your own safety. After finishing the cut, there are also steps that can be taken to give a final polish to the cut edges. Buy some sanding blocks to sand the edges, or use sandpaper to smooth the edges.
By Carol from Seychelles - 2018.09.29 17:23
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Philipppa from Auckland - 2017.02.18 15:54