Hot sale Carbon Fiber Design - Lightweight phone case carbon fiber shockproof and anti-drop – Feimoshi
Hot sale Carbon Fiber Design - Lightweight phone case carbon fiber shockproof and anti-drop – Feimoshi Detail:
Lightweight phone case carbon fiber shockproof and anti-drop
Below is the newest iPhone 13 cases:
1. Material: Kevlar Fiber
2. Technology: Vacuum Pumping by Autoclave equipment
3. Weight: as light as you thought
4. MOQ: 10pc
5. Matte surface, no sweats, no fingerprints;
6. 4-side protection, camera lens protection;
7. Excellent grip, no loose;
8. 1:1 precise cutouts for ports and buttons;
9. Like a skin, keep the original beauty/feeling of the device
Why do we use aramid fiber, but don’t use carbon fiber?
Aramid fiber is commonly used in aerospace and performance automotive industries, as it is exceptionally durable and lightweight.
Different from carbon fiber, aramid fiber does not affect your phone’s signal (Wi-Fi, GPS, and cell reception), making it the ideal material for phone cases.
Using vacuum forming technologies, we can mold aramid fiber into a multitude of designs while maintaining its strength and protective qualities.
Product detail pictures:
Related Product Guide:
Carbon fiber and carbon fiber tube have different pressure capacity. Why are carbon fiber and carbon fiber tubes different in pressure? This is because carbon fiber is not the same as carbon fiber composite material. Carbon fiber composite material is an intermediate material that is fused with carbon fiber and resin. In terms of performance, carbon fiber is much higher than carbon fiber composite materials, but carbon fiber cannot be used as a material alone. 1. Carbon fiber pressure bearing capacity: The tensile strength of carbon fiber material is 3530MPa, 1MPa=1N/mm2, which is 3530N/mm2, which means that it can withstand a force of 3530 Newtons on a cross section of 1 square millimeter, which is 353Kg. 2. The pressure-bearing capacity of carbon fiber composite materials: the carbon fiber tube with T700 grade, 1.6mm thickness, 50mm inner diameter and 500mm length is used for testing, and the measured tensile strength is about 230MPa, that is, the cross section of 1 square millimeter bears a force of 230 Newtons , which is 23Kg. Hot sale Carbon Fiber Design - Lightweight phone case carbon fiber shockproof and anti-drop – Feimoshi , The product will supply to all over the world, such as: Rwanda, Greece, United Arab emirates, Carbon Fiber Forming: Carbon fiber sheets made of epoxy glue are not thermoset (thermoformable) - the finished sheet cannot be heated and bent to maintain the bent shape. Carbon fiber laminate does not stretch easily like plastic. You can get very insufficient permanent index of refraction in an orientation above high fever, but because of this difficulty, we do not strongly recommend the application. Molded pieces are possible, but the carbon fiber fabric must be stored in the mold and the epoxy glue introduced prior to the heating/drying process.
By Andrew from Swiss - 2017.09.30 16:36
After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
By Matthew from Sri Lanka - 2017.08.18 18:38