Hot-selling Carbon Fiber Mount - 3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels – Feimoshi
Hot-selling Carbon Fiber Mount - 3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels – Feimoshi Detail:
3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels
Carbon fiber plates are made from high-quality carbon fiber material, our carbon fiber sheets panels are durable, high quality, and affordable.
1. All our carbon fiber sheets are made with 100% real carbon fiber prepreg cloth. Varieties of carbon fiber sheets can be offered to meet different requirements.
2. Each sheet is hand finished and inspected. Special materials and processes ensure the flawless gloss on both sides.
3. Different thicknesses and sizes for choosing :
Size :400×500 ;500×500; 500x600mm thickness :0.3-20mm
FAQ
1) Do you make the T300/T700 carbon fiber plate?
Yes, our normal plate is Toray T300 full carbon fiber plate.
2) T700 is stronger than T300?
Normally, T300 plate is strong enough for the FPV drone.
Also some customers perfers the T700 plate. It is up to your choice.
3) Could we do the CNC cutting service?
Yes, CNC cutting, chamfer and countersunk are all ok.
4) How many days for the production time?
About 7-15 working days based on the drawings’ comprehensive.
5) Sample for testing is avaliable?
Of course, you could make the bulk order. And we will make the free sample for your testing.
Product detail pictures:
Related Product Guide:
Composite materials composed of carbon fiber and epoxy resin have become an advanced aerospace material due to their small specific gravity, good rigidity and high strength. Because every kilogram of the weight of the space vehicle is reduced, the launch vehicle can be reduced by 500 kilograms. Therefore, there is a race to adopt advanced composite materials in the aerospace industry. There is a vertical take-off and landing fighter, and the carbon fiber composite material used in it has accounted for 1/4 of the weight of the whole aircraft and 1/3 of the weight of the wing. According to reports, the key components of the three rocket thrusters on the US space shuttle and the advanced MX missile launch tube are all made of advanced carbon fiber composite materials. Hot-selling Carbon Fiber Mount - 3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels – Feimoshi , The product will supply to all over the world, such as: Florida, Tunisia, Johannesburg, There are many kinds of carbon fiber tube production processes, such as winding molding, pultrusion molding, compression molding, roll molding, autoclave molding, air bag molding, etc., carbon fiber tubes with different needs often use different production processes. Common square tube molding and round tube rolling. The carbon fiber prepreg is used here, minus the impregnation process. Can improve production efficiency.
By Joseph from European - 2018.02.21 12:14
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By John biddlestone from Uganda - 2018.09.16 11:31
