The excellent performance advantages of carbon fiber materials. The carbon fiber products used in this material can achieve a good effect of light weight. In the use of the fiber processing parts, they are often assembled/piece products. The arsenic fiber processing In the actual production of parts, it is necessary to carry out corresponding machining treatment in order to better meet the actual requirements. In this article, we will talk about the points that need to be paid attention to during the processing of carbon fiber processed parts.
The production and processing steps of carbon fiber product processing are normally to carry out the pre-cutting, laying and curing of carbon fiber processed parts first, and then carry out subsequent precision processing, which requires multiple embarrassment and punching processes. In order to better apply it to the equipment, it will be sprayed and then polished, so that the entire application can well meet the needs of customers.
Points for attention in processing carbon fiber parts.
1. Grinding. In the process of carbon fiber product processing, grinding is an indispensable process. There is a difference between rough grinding and fine grinding. Normally, the purpose is to roughly grind away impurities and raised areas on the surface of the workpiece, and then fine grinding is often the product that has been machined. After a certain stage, the processing method will make the overall accuracy performance better meet the actual application situation, and then better meet the needs of users.
2. Spray paint. Painting is usually carried out after rough grinding, so that the entire surface of the carbon fiber product looks smoother. In the process of painting, it must be cleaned after rough grinding, and each time the paint is sprayed, it needs to be baked once. Dry.
3 drill holes. Drilling process is the place where we need to pay special attention to avoid drilling stratification. At this time, we need to choose a suitable drill bit and adopt a reasonable drilling method. Jinxing chooses solid carbide drill bits. If the drill bit is not hard enough, it will wear itself seriously, and at the same time, it will damage the carbon fiber plate, causing delamination or even tearing.
4. Cutting. Cutting is a step that must be carried out for carbon fiber processed parts, because in the actual production process, it must be cut. At this time, we must pay attention to it, because the inside of carbon fiber products is a carbon filament, so it is easy to cut. If the carbon fiber workpiece breaks due to cutting, then try to choose a double-edged compression milling cutter with left and right helical blades, which has both upper and lower helical tips. The cutting force is directed to the inner side of the material to obtain stable cutting conditions, which can inhibit the occurrence of material delamination.
Therefore, there are still many steps in the production process of a simple carbon fiber processed product, and if you want to do it well, you must be very refined, otherwise it will be easily scrapped and cause losses. When we choose carbon fiber processed parts, more It is still necessary to look for high-quality carbon fiber product manufacturers.
Post time: Jun-27-2023