One of Hottest for Rc Racing Carbon Fiber - DIY 3K large diameter Carbon fiber round/square rod boom – Feimoshi
One of Hottest for Rc Racing Carbon Fiber - DIY 3K large diameter Carbon fiber round/square rod boom – Feimoshi Detail:
DIY 3K large diameter Carbon fiber round/square rod boom
Product Description
Our Carbon Fiber Tube is great performance and appearance. Made from attractive pattern plain twill or as customer requirement.
We make the Carbon Fiber Tubes by rolling-Wrapped process. It makes the carbon fiber tube much stronger and professional. More and more customers choose the full carbon fiber tube to make the drone arm, desk leg, gimbal stand and so on. And you could offer your creative ideal, we could help you to come ture. Carbon fiber tube is also widly used in building construction. It makes them much lighter and easy to move.
Material: 100% carbon fiber, Vinyl resin, Epoxy resin.
Thickness:1.0mm/1.5mm/2.0mm
Length: longest length is 2000mm
Appearance: 3K twill weave, plain weave, or other
Looking for ideal Carbon Fiber carbon fiber tube Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Epoxy Resin Carbon Fiber 3k Woven are quality guaranteed. We are China Origin Factory of Carbon Fiber Shape. If you have any question, please feel free to contact us.
Product detail pictures:
Related Product Guide:
Composite materials composed of carbon fiber and epoxy resin have become an advanced aerospace material due to their small specific gravity, good rigidity and high strength. Because every kilogram of the weight of the space vehicle is reduced, the launch vehicle can be reduced by 500 kilograms. Therefore, there is a race to adopt advanced composite materials in the aerospace industry. There is a vertical take-off and landing fighter, and the carbon fiber composite material used in it has accounted for 1/4 of the weight of the whole aircraft and 1/3 of the weight of the wing. According to reports, the key components of the three rocket thrusters on the US space shuttle and the advanced MX missile launch tube are all made of advanced carbon fiber composite materials. One of Hottest for Rc Racing Carbon Fiber - DIY 3K large diameter Carbon fiber round/square rod boom – Feimoshi , The product will supply to all over the world, such as: St. Petersburg, Turkey, Belize, When cutting carbon fiber board, there are some tips to refer to. When cutting, you can mark it with a tool, and then widen the mark a little bit, so that you can leave enough space to sand the carbon fiber board a little, this way can avoid chips and debris, and make the edge of the carbon fiber board smoother, to further protect your own safety. After finishing the cut, there are also steps that can be taken to give a final polish to the cut edges. Buy some sanding blocks to sand the edges, or use sandpaper to smooth the edges.
By Prudence from Austria - 2018.06.12 16:22
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Judith from Indonesia - 2017.09.28 18:29
