English
2021 China New Design Carbon Fiber Chassis - 3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels – Feimoshi Featured Image
  • 2021 China New Design Carbon Fiber Chassis - 3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels – Feimoshi
  • 2021 China New Design Carbon Fiber Chassis - 3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels – Feimoshi

2021 China New Design Carbon Fiber Chassis - 3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels – Feimoshi


Product Detail

Product Tags

Related Video

Feedback (2)

The molding methods of carbon fiber products mainly include two ways: First, the molding process, the molding is to place the carbon fiber material between the upper and lower molds, under the action of the pressure and temperature of the hydraulic press, the material fills the mold cavity and removes the residual Air, after a period of high temperature and high pressure, solidifies the resin in the carbon fiber material, and a carbon fiber product can be obtained after demolding. This process greatly reduces the production cost, and has high production efficiency, and is suitable for forming carbon fiber products with complex structures. Second, the autoclave forming process, the autoclave is a special container that can withstand and adjust the stability and pressure within a certain range. The carbon fiber prepreg is laid on the surface of the mold coated with mold release agent, and then covered with mold release cloth, suction felt, isolation film, and air felt in turn, sealed in a vacuum bag, and heated and cured in an autoclave. Before, it needs to be vacuumed to check the tightness, and then put into an autoclave for curing and molding under the action of high temperature and high pressure. This process is suitable for load-bearing structural parts that require high mechanical properties. Forged Carbon Fiber Sheet, Drone Frame, Composite Frame, The production process of carbon fiber tubes is different, and the strength of the products produced is also different. Taking T700 carbon fiber and resin as raw materials and a carbon fiber tube made by winding molding process as an example, the carbon fiber tube with a size of 1.6*50*500mm is tested, and it can be found that the average compressive strength of the carbon fiber tube can reach 230MPa, which will occur when the load is exceeded. Brittle failure, the strength of the matrix determines the strength of the carbon fiber tube.In the tensile strength test of the carbon fiber tube, it was found that the carbon tube can withstand a tensile strength of more than 800MPa, and the maximum strain is 0.03, and the tensile resistance of the carbon tube is very good.Carbon fiber composite materials have many advantages such as light weight and high strength. Carbon fiber tubes can be made by winding, rolling, and pultrusion.
2021 China New Design Carbon Fiber Chassis - 3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels – Feimoshi Detail:

 

 

 

3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels

Carbon fiber plates are made from high-quality carbon fiber material, our carbon fiber sheets panels are durable, high quality, and affordable.

1. All our carbon fiber sheets are made with 100% real carbon fiber prepreg cloth. Varieties of carbon fiber sheets can be offered to meet different requirements.

2. Each sheet is hand finished and inspected. Special materials and processes ensure the flawless gloss on both sides.

3. Different thicknesses and sizes for choosing :

Size :400×500 ;500×500; 500x600mm thickness :0.3-20mm

carbon fiber cutting partsDSC04680

FAQ

1) Do you make the T300/T700 carbon fiber plate?

Yes, our normal plate is Toray T300 full carbon fiber plate.

2) T700 is stronger than T300?

Normally, T300 plate is strong enough for the FPV drone.

Also some customers perfers the T700 plate. It is up to your choice.

3) Could we do the CNC cutting service?

Yes, CNC cutting, chamfer and countersunk are all ok.

4) How many days for the production time?

About 7-15 working days based on the drawings’ comprehensive.

5) Sample for testing is avaliable?

Of course, you could make the bulk order. And we will make the free sample for your testing.

Product detail pictures:

2021 China New Design Carbon Fiber Chassis - 3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels – Feimoshi detail pictures

2021 China New Design Carbon Fiber Chassis - 3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels – Feimoshi detail pictures

Related Product Guide:
Carbon fiber and carbon fiber tube have different pressure capacity. Why are carbon fiber and carbon fiber tubes different in pressure? This is because carbon fiber is not the same as carbon fiber composite material. Carbon fiber composite material is an intermediate material that is fused with carbon fiber and resin. In terms of performance, carbon fiber is much higher than carbon fiber composite materials, but carbon fiber cannot be used as a material alone. 1. Carbon fiber pressure bearing capacity: The tensile strength of carbon fiber material is 3530MPa, 1MPa=1N/mm2, which is 3530N/mm2, which means that it can withstand a force of 3530 Newtons on a cross section of 1 square millimeter, which is 353Kg. 2. The pressure-bearing capacity of carbon fiber composite materials: the carbon fiber tube with T700 grade, 1.6mm thickness, 50mm inner diameter and 500mm length is used for testing, and the measured tensile strength is about 230MPa, that is, the cross section of 1 square millimeter bears a force of 230 Newtons , which is 23Kg. 2021 China New Design Carbon Fiber Chassis - 3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels – Feimoshi , The product will supply to all over the world, such as: Berlin, Los Angeles, Colombia, Carbon fiber tube production process and characteristics
    • The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.
    5 Stars By Elsa from Hongkong - 2017.11.01 17:04
    Production management mechanism is completed, quality is guaranteed, high credibility and service let the cooperation is easy, perfect!
    5 Stars By Marcie Green from Sevilla - 2017.10.25 15:53

    Send your message to us:

    Write your message here and send it to us

    related products

    Send your message to us:

    Write your message here and send it to us
    Hit enter to search or ESC to close