China Factory for Carbon Fiber Climbing Cane - Autoclave kevlar Phone Case Compatible with iPhone 13mini, iphone 13, phone 13 pro & 13 pro max – Feimoshi
China Factory for Carbon Fiber Climbing Cane - Autoclave kevlar Phone Case Compatible with iPhone 13mini, iphone 13, phone 13 pro & 13 pro max – Feimoshi Detail:
Why choose Autoclave phone case?
Easy to use even with complex curvature of the product
Zero voids.
Perfect appearance of the carbon fiber fabric.
Excellent fatigue resistance.
Laminate thickness keeped under control.
The process is clean.
The process offers better quality as well as conformity.
Autoclave kevlar Phone Case Compatible with iPhone 13mini, iphone 13, phone 13 pro & 13 pro max Protective Cases – aramid Bullet-Proof Material – Wireless Charging Capable – Slim, Drop Protection – Textured, Non-Scratch Shell
Why choose Aramid/Kevlar fibers?
High strength
Good resistance to abrasion
Good resistance to organic solvents
Non-conductive
No melting point
Low flammability
Good fabric integrity at elevated temperatures
Product detail pictures:
Related Product Guide:
The molding methods of carbon fiber products mainly include two ways: First, the molding process, the molding is to place the carbon fiber material between the upper and lower molds, under the action of the pressure and temperature of the hydraulic press, the material fills the mold cavity and removes the residual Air, after a period of high temperature and high pressure, solidifies the resin in the carbon fiber material, and a carbon fiber product can be obtained after demolding. This process greatly reduces the production cost, and has high production efficiency, and is suitable for forming carbon fiber products with complex structures. Second, the autoclave forming process, the autoclave is a special container that can withstand and adjust the stability and pressure within a certain range. The carbon fiber prepreg is laid on the surface of the mold coated with mold release agent, and then covered with mold release cloth, suction felt, isolation film, and air felt in turn, sealed in a vacuum bag, and heated and cured in an autoclave. Before, it needs to be vacuumed to check the tightness, and then put into an autoclave for curing and molding under the action of high temperature and high pressure. This process is suitable for load-bearing structural parts that require high mechanical properties. China Factory for Carbon Fiber Climbing Cane - Autoclave kevlar Phone Case Compatible with iPhone 13mini, iphone 13, phone 13 pro & 13 pro max – Feimoshi , The product will supply to all over the world, such as: Argentina, Finland, Jeddah, With the improvement of the production process, carbon fiber board will popularize or replace many metal structural materials, providing the possibility for the lightness and convenience of products.
By Belinda from Brazil - 2017.08.28 16:02
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Eileen from New Orleans - 2018.07.27 12:26
Send your message to us:
Write your message here and send it to us