Factory Cheap Hot Carbon Fiber Wallet - Beautiful mobile phone shell, iphone 13 – Feimoshi

Send email to us

Product Detail

Product Tags

Feedback (2)

After data comparison, it is obvious that there is a gap between the mechanical properties of carbon fiber and carbon fiber composite materials, but even so, the carbon fiber pipe made of carbon fiber composite material far exceeds the pressure bearing capacity of steel pipe. Thin Carbon Fiber Sheets, Composite Part, Carbon Plastic Plate, With the gradual promotion of carbon fiber materials in the industrial field, the frequency of use of carbon fiber tubes is getting higher and higher.

Factory Cheap Hot Carbon Fiber Wallet - Beautiful mobile phone shell, iphone 13 – Feimoshi Detail:

Handled by: Autoclave

Material: Kevlar

Model: iPhone13 mini/iPhone13 /iPhone13 Pro/iPhone13 Pro Max

Why choose Autoclave phone case?

Easy to use even with complex curvature of the product
Zero voids.
Perfect appearance of the carbon fiber fabric.
Excellent fatigue resistance.
Laminate thickness keeped under control.
The process is clean.
The process offers better quality as well as conformity.

Product detail pictures:

Related Product Guide:

The molding methods of carbon fiber products mainly include two ways: First, the molding process, the molding is to place the carbon fiber material between the upper and lower molds, under the action of the pressure and temperature of the hydraulic press, the material fills the mold cavity and removes the residual Air, after a period of high temperature and high pressure, solidifies the resin in the carbon fiber material, and a carbon fiber product can be obtained after demolding. This process greatly reduces the production cost, and has high production efficiency, and is suitable for forming carbon fiber products with complex structures. Second, the autoclave forming process, the autoclave is a special container that can withstand and adjust the stability and pressure within a certain range. The carbon fiber prepreg is laid on the surface of the mold coated with mold release agent, and then covered with mold release cloth, suction felt, isolation film, and air felt in turn, sealed in a vacuum bag, and heated and cured in an autoclave. Before, it needs to be vacuumed to check the tightness, and then put into an autoclave for curing and molding under the action of high temperature and high pressure. This process is suitable for load-bearing structural parts that require high mechanical properties. Factory Cheap Hot Carbon Fiber Wallet - Beautiful mobile phone shell, iphone 13 – Feimoshi , The product will supply to all over the world, such as: Bulgaria, Gabon, Stuttgart, Carbon Fiber Forming: Carbon fiber sheets made of epoxy glue are not thermoset (thermoformable) - the finished sheet cannot be heated and bent to maintain the bent shape. Carbon fiber laminate does not stretch easily like plastic. You can get very insufficient permanent index of refraction in an orientation above high fever, but because of this difficulty, we do not strongly recommend the application. Molded pieces are possible, but the carbon fiber fabric must be stored in the mold and the epoxy glue introduced prior to the heating/drying process.

Carbon Fiber Countersunk