Factory Supply Carbon Fiber Opener - Custom Octagonal composite carbon fiber square tube for accessories – Feimoshi
Factory Supply Carbon Fiber Opener - Custom Octagonal composite carbon fiber square tube for accessories – Feimoshi Detail:
Custom Octagonal composite carbon fiber square tube for accessories
In these recent years, custom carbon fiber tube is more populare in the drone market.
Also we have carbon fiber round tube, carbon fiber octagonal tube and carbon fiber square tube in stock.
Different size and type is avaliable for your choosing.
Small carbon fiber round tube could be inserting the large carbon fiber tube according to your requirements.
Carbon fiber rectangle tube, large carbon fiber tubes, carbon fiber tube handguard, ect. are all customized according to your requirements.
If you have any other requirements, please don’t hesitate to contact us.
Product detail pictures:
Related Product Guide:
For special-shaped parts with complex shapes, if you want to use carbon fiber to complete it, you need to design 3D engineering drawings in the early stage, and make unique production molds according to the design drawings. Only after the mold is manufactured, can a series of processing processes be carried out, such as carbon fiber pre-soaking and laying, drying and forming, and finally the finished carbon fiber special-shaped parts can be produced. In the early stage of high-precision special-shaped parts, a large number of estimates and tests must be carried out, and the best scheme design and production methods must be sorted out to produce composite standard carbon fiber special-shaped parts products. During this period, all stages such as design plan, raw material selection, mold quality, construction quality control, etc. must be strictly followed. Neglect at all stages will jeopardize the final quality of the product. Factory Supply Carbon Fiber Opener - Custom Octagonal composite carbon fiber square tube for accessories – Feimoshi , The product will supply to all over the world, such as: Plymouth, Tajikistan, Iran, Carbon Fiber Forming: Carbon fiber sheets made of epoxy glue are not thermoset (thermoformable) - the finished sheet cannot be heated and bent to maintain the bent shape. Carbon fiber laminate does not stretch easily like plastic. You can get very insufficient permanent index of refraction in an orientation above high fever, but because of this difficulty, we do not strongly recommend the application. Molded pieces are possible, but the carbon fiber fabric must be stored in the mold and the epoxy glue introduced prior to the heating/drying process.
By Olive from Lesotho - 2018.12.11 11:26
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Clara from Cape Town - 2018.12.11 11:26
Send your message to us:
Write your message here and send it to us