Good Quality Carbon Fiber Sheet - Twill glossy custom cnc carbon fiber part – Feimoshi
Good Quality Carbon Fiber Sheet - Twill glossy custom cnc carbon fiber part – Feimoshi Detail:
Twill glossy custom cnc carbon fiber part
Description:
Hobbycarbon is a professional manufacturer of carbon fiber products for more than 10 years. We have our own CNC maching.
Not only we can produce full carbon fiber plate, we also can use carbon fiber board to cut the shape required by the customer.
Before we quote, let me know quantity, thickness and send us drawing. (3D or 2D)
Size: regular size is 400x500mm/500x600mm (other size also is ok)
Thickness: 0.3mm-20mm
Weave: Plain/ Twill
Surface: Glossy/ Matte
Payment way: Paypal, Bank
Delivery time: 3-7 working days
Product detail pictures:
Related Product Guide:
Carbon fiber and carbon fiber tube have different pressure capacity. Why are carbon fiber and carbon fiber tubes different in pressure? This is because carbon fiber is not the same as carbon fiber composite material. Carbon fiber composite material is an intermediate material that is fused with carbon fiber and resin. In terms of performance, carbon fiber is much higher than carbon fiber composite materials, but carbon fiber cannot be used as a material alone. 1. Carbon fiber pressure bearing capacity: The tensile strength of carbon fiber material is 3530MPa, 1MPa=1N/mm2, which is 3530N/mm2, which means that it can withstand a force of 3530 Newtons on a cross section of 1 square millimeter, which is 353Kg. 2. The pressure-bearing capacity of carbon fiber composite materials: the carbon fiber tube with T700 grade, 1.6mm thickness, 50mm inner diameter and 500mm length is used for testing, and the measured tensile strength is about 230MPa, that is, the cross section of 1 square millimeter bears a force of 230 Newtons , which is 23Kg. Good Quality Carbon Fiber Sheet - Twill glossy custom cnc carbon fiber part – Feimoshi , The product will supply to all over the world, such as: Hamburg, Philippines, Iran, In general, grinding and filing can grind the edges of sharp carbon fiber boards to a smooth appearance. However, if the fiberboard is exposed to harsh environments for a long time, such as marine environments, a two-part epoxy laminate is used to seal the edges.According to the different divisions of carbon fiber precursors, there are generally pitch-based carbon fiber cloth, PAN-based carbon fiber cloth, and viscose-based carbon fiber cloth.Second, according to different specifications, it can be divided into 1K, 3K, 6K, 12K and 24K and above carbon fiber cloth.Third, according to different carbonization, it can also be divided into graphitized carbon fiber cloth, (this carbon fiber cloth can withstand high temperature of 2,000 to 3,000), carbon fiber cloth (can cope with high temperature of about 1,000 degrees), and pre-oxidized carbon fiber cloth (can Resist the high temperature of 200~3 Baidu).Fourth, according to different manufacturing methods, subsequent divisions can be performed. Woven carbon fiber cloth, generally two-dimensional cloth, three-dimensional cloth and three-dimensional woven cloth, etc.; carbon fiber prepreg cloth, including dry and wet prepreg cloth; carbon fiber non-woven fabric, non-woven fabric, also known as chopped strand mat, Continuous felt, surface felt, stitched felt, etc.
By Kristin from Guatemala - 2018.10.01 14:14
The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
By Cherry from Turkey - 2017.02.18 15:54
Send your message to us:
Write your message here and send it to us