Good quality Composite Cnc - 2.0mm Twill matte CNC carbon fiber composite cutting opener mount – Feimoshi
Good quality Composite Cnc - 2.0mm Twill matte CNC carbon fiber composite cutting opener mount – Feimoshi Detail:
2.0mm Twill matte CNC carbon fiber composite cutting opener mount
400X500X2.0mm and 500X600X2.0mm 3K twill matte carbon fiber plate could be cut to different types. 2.0mm thickness is very suitable for the carbon fiber opener. Normally, we could do some stocked quantity for 2.0mm thickness. Carbon fiber sheet is made of 3K twill matte cloth and UD cloth and epoxy resin.
CNC cutting service is ok for us. If you feel that the edge is very sharp, we could do the chamfer for the edge to make it more professional. Also wanting to connect the hardware with carbon fiber parts, contact us freely. Our engineer team will offer some good suggestions for your choosing.
Product detail pictures:
Related Product Guide:
After data comparison, it is obvious that there is a gap between the mechanical properties of carbon fiber and carbon fiber composite materials, but even so, the carbon fiber pipe made of carbon fiber composite material far exceeds the pressure bearing capacity of steel pipe. Good quality Composite Cnc - 2.0mm Twill matte CNC carbon fiber composite cutting opener mount – Feimoshi , The product will supply to all over the world, such as: Yemen, Japan, South Korea, At the time of winding, the carbon fiber should be stable and not deviated, and the surface of the mandrel should be uniformly and continuously covered. Arranged according to a certain law, so that adjacent chemical fibers are neither easy to overlap nor have gaps, this law is called "winding law". The winding laws are different, and the quality of the carbon fiber pipes is also different. The proper design of the winding shape can ensure the quality of the carbon fiber pipes.
By Harriet from Amsterdam - 2017.05.02 11:33
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Jean Ascher from Romania - 2018.11.28 16:25
Send your message to us:
Write your message here and send it to us