There are three factors that affect the performance of carbon fiber tube manufacturing.

In the entire application process of carbon fiber materials, plates and pipes are two very common carbon fiber products. Many carbon fiber products are also processed from carbon fiber plates and carbon fiber tubes. For the production and manufacture of common carbon fiber plates and carbon fiber tubes What factors will affect product performance? In this article, we will take the production of carbon fiber tube products as an example.

1. The manufacturing process, in fact, is not just a single carbon fiber tube. The performance of many carbon fiber products has a lot to do with the molding process. The carbon fiber product forming processes include molding, winding, hand lay-up, rolling, pultrusion, etc. Wait, all these processes on the same carbon fiber round tube can be completed, but the quality of the product after molding is still different. The performance of your carbon fiber tube that is like winding is better than that of carbon fiber tubes made by other molding processes. Because the angle of the carbon filament is designed in advance for winding forming, the corresponding winding is carried out, so that the entire layout of the internal carbon fiber tow is uniform, and it can better play a load-bearing effect in use.

2. Raw materials affect performance. This is undoubtedly a place that affects performance. Just like the common plastic pots in our lives, pots made of different special plastic materials also show different effects in terms of drop resistance and durability. The same is true for carbon fiber tubes, which will also choose raw materials according to customer needs. Generally, carbon fiber T300 materials will be used. If the effect may not be achieved, T700 carbon broken fiber materials will be used, which is better. performance improvement. The resin matrix including the matrix material will also undergo corresponding changes to better improve performance.

3. Machining affects performance. Our carbon fiber tubes often need to be assembled and applied. At this time, machining is required to better meet the actual use needs. If you don’t know about carbon fiber products, you can use them in machining Sometimes it is prone to damage. For example, if the internal carbon filament is interrupted too much, there must be a difference between the performance and the unbroken performance, and there must be a difference in the stress performance.

The above is the interpretation of the possible differences in the performance of carbon fiber tubes from the three general directions. When using carbon fiber tube products, it is necessary to make corresponding choices according to their actual performance requirements, and then choose reliable ones. Manufacturer of carbon fiber products.