OEM/ODM Manufacturer Carbon Fiber Structural Component - Aramid kevlar full Carbon Fiber Phone Case holder For iPhone 13 – Feimoshi
OEM/ODM Manufacturer Carbon Fiber Structural Component - Aramid kevlar full Carbon Fiber Phone Case holder For iPhone 13 – Feimoshi Detail:
Aramid kevlar full Carbon Fiber Phone Case holder For iPhone 13
Description:
Recently, iPhone 13 were sold very well. And our company also launched a carbon fiber phone case to match this phone.
(including iPhone13 mini, iPhone13, iPhone13 Pro, iPhone13 Pro Max).
We use Kevlar to make it. it have light weight, good flexibility advantage.
At present, we only have black, red and brown color. if you need other color, we could customize it for you.
Our MOQ is 1pcs.
If any interested, welcome to send a inquiry to us.
Because Kevlar is a tough material, it may be slightly tougher to trim than our standard carbon veneers.
Can also be used for outdoor applications as we utilize a UV resistant resin that extends the life of the part and finish under sun exposure.
This carbon kevlar twill fabric combines the properties of 2 unique reinforcement yarns.
Carbon provides high levels of stiffness and strength, whereas aramid provides huge impact/abrasion/fracture resistance.
This distinct looking hybrid cloth is used in many high-performance, high-impact applications such as canoes, military ballistics and rally-car panelling.
Carbon/Kevlar twill cloth can be used in just the same way as standard carbon fibre.
When using only carbon/Kevlar reinforcement in a part you should expect to use several layers of this fabric in each part.
None-structural components like body panels and covers will typically require 3-6 layers of a carbon fibre cloth of this weight.
Although carbon and aramid fiber have similar characteristics, they also have some distinct differences:
A carbon fiber phone case is known for its tensile strength and compression that offers protection for your phone.
The downside to it, however, is that it gets brittle over time. An aramid phone case, on the other hand, is more flexible, which means that it will last longer.
Carbon fiber is naturally black, which is why most carbon phone cases are black because it’s tougher to dye in a different color.
Aramid fiber, on the other hand, light gold in color so it’s easier to dye in a wide variety of colors.
Carbon fiber is known to conduct electricity because of its natural characteristics.
This is why there’s a tendency that you might have some signal interruptions when you’re using a carbon fiber phone case.
On the other hand, you won’t have any signal problems with an aramid phone case.
In terms of strength and durability, both carbon fiber and aramid phone cases deliver to the highest standards.
In the end, it all boils down to flexibility.
Aramid phone cases are some of the thinnest and lightest cases that you’ll find in the market while carbon phone cases are a lot heavier because of their make.
Carbon gets the upper hand, however, when it comes to how it can protect your mobile phone.
So when choosing the best phone case, think about your lifestyle and what material would be most convenient for your needs.
Brand: FEIMOSHI
Name: Carbon fiber phone case
Color: red, black, brown
MOQ: 1 pcs
Product detail pictures:
Related Product Guide:
Carbon fiber and carbon fiber tube have different pressure capacity. Why are carbon fiber and carbon fiber tubes different in pressure? This is because carbon fiber is not the same as carbon fiber composite material. Carbon fiber composite material is an intermediate material that is fused with carbon fiber and resin. In terms of performance, carbon fiber is much higher than carbon fiber composite materials, but carbon fiber cannot be used as a material alone. 1. Carbon fiber pressure bearing capacity: The tensile strength of carbon fiber material is 3530MPa, 1MPa=1N/mm2, which is 3530N/mm2, which means that it can withstand a force of 3530 Newtons on a cross section of 1 square millimeter, which is 353Kg. 2. The pressure-bearing capacity of carbon fiber composite materials: the carbon fiber tube with T700 grade, 1.6mm thickness, 50mm inner diameter and 500mm length is used for testing, and the measured tensile strength is about 230MPa, that is, the cross section of 1 square millimeter bears a force of 230 Newtons , which is 23Kg. OEM/ODM Manufacturer Carbon Fiber Structural Component - Aramid kevlar full Carbon Fiber Phone Case holder For iPhone 13 – Feimoshi , The product will supply to all over the world, such as: Houston, Bahamas, Eindhoven, The surface of the wound carbon fiber prepreg must be coated with a layer of OPP, and then the wound carbon fiber tube is sent to a high-temperature curing furnace to dry and form, and finally the mold is released, and the unstable parts on both sides are cut off to carry out production and processing solutions.
By Jo from Curacao - 2017.03.28 12:22
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Grace from Belgium - 2017.06.29 18:55
