Special Price for Carbon Fiber L Bracket - High quality carbon license plate – Feimoshi

Send email to us

Product Detail

Product Tags

Feedback (2)

After data comparison, it is obvious that there is a gap between the mechanical properties of carbon fiber and carbon fiber composite materials, but even so, the carbon fiber pipe made of carbon fiber composite material far exceeds the pressure bearing capacity of steel pipe. Carbon Fiber Rc Frame, 3k Composite Plate, Drill Carbon Fiber, The production process of carbon fiber tubes is different, and the strength of the products produced is also different. Taking T700 carbon fiber and resin as raw materials and a carbon fiber tube made by winding molding process as an example, the carbon fiber tube with a size of 1.6*50*500mm is tested, and it can be found that the average compressive strength of the carbon fiber tube can reach 230MPa, which will occur when the load is exceeded. Brittle failure, the strength of the matrix determines the strength of the carbon fiber tube.In the tensile strength test of the carbon fiber tube, it was found that the carbon tube can withstand a tensile strength of more than 800MPa, and the maximum strain is 0.03, and the tensile resistance of the carbon tube is very good.Carbon fiber composite materials have many advantages such as light weight and high strength. Carbon fiber tubes can be made by winding, rolling, and pultrusion.

Special Price for Carbon Fiber L Bracket - High quality carbon license plate – Feimoshi Detail:

This kind of carbon fiber license plate Fits USA, CANADA and Mexico Standard

Sizs 6.25″ x 12.25″

Surface: 3k glossy, forged glossy

Product detail pictures:

Related Product Guide:

Carbon fiber greatly improves the characteristics of special-shaped parts. At this stage, carbon fiber special-shaped products have many requirements in the fields of unmanned aircraft, auto parts, intelligent robots, etc. Special Price for Carbon Fiber L Bracket - High quality carbon license plate – Feimoshi , The product will supply to all over the world, such as: Sao Paulo, Bandung, Suriname, There are many kinds of carbon fiber tube production processes, such as winding molding, pultrusion molding, compression molding, roll molding, autoclave molding, air bag molding, etc., carbon fiber tubes with different needs often use different production processes. Common square tube molding and round tube rolling. The carbon fiber prepreg is used here, minus the impregnation process. Can improve production efficiency.

Carbon Fiber Desktop