2021 Good Quality Cut Cnc - T700/T300 3K Full Carbon Fiber Sheet – Feimoshi

Send email to us

Product Detail

Product Tags

Feedback (2)

In the aerospace industry, carbon fiber sheets are used to make aircraft components such as fuselage panels, control surfaces and wingtips. The resulting components are lightweight, yet robust. Carbon fiber is widely adopted by the aerospace industry due to its superior strength-to-weight ratio. Because carbon fiber has such a beautiful appearance, it is also ideal for aircraft interiors. Cut Carbon Fiber Sheet, Carbon Fiber Design, Carbon Fiber Oars, The advantages of carbon fiber products are:1. High strength, light weight, do not spend a lot of manpower and material resources when handling.2. The tensile strength, flexural strength and flexural modulus are all very high, and they are not deformed within a certain range.3. Good pressure resistance and toughness.4. Good wear resistance, black carbon fiber tube factory, you can rest assured that it is in contact with other items, without worrying about wear and deformation.5. The chemical performance is stable, and it is not corroded by acid, alkali and salt.

2021 Good Quality Cut Cnc - T700/T300 3K Full Carbon Fiber Sheet – Feimoshi Detail:

T700 3K Full Carbon Fiber Sheet

T700S is the highest tensile strength, standard modulus carbon fiber available in the industry. Standard modulus carbon fibers are available in tow sizes from 1K to 24K.

3K is recognized as the most delicate surface for fpv frames.

Our normal stock of sheets including full Carbon Fiber Sheets, Carbon Glass Sheet and G10 Glass Fiber Sheet.

T700 carbon fiber plate, toray carbon fiber, 3k carbon fiber sheets ,Carbon Fiber Sheet Product one of the most pouplar sheets.

Our normal stocked type is Toray T300 full carbon fiber sheet, carbon fiber tube, CNC cutting service, OEM/ODM and logo service.

FAQ

1) Do you make the T300/T700 carbon fiber plate?

Yes, our normal plate is Toray T300 full carbon fiber plate.

2) T700 is stronger than T300?

Normally, T300 plate is strong enough for the FPV drone.

Also some customers perfers the T700 plate. It is up to your choice.

3) Could we do the CNC cutting service?

Yes, CNC cutting, chamfer and countersunk are all ok.

4) How many days for the production time?

About 7-15 working days based on the drawings’ comprehensive.

5) Sample for tesing is avaliable?

Of course, you could make the bulk order. And we will make the free sample for your testing.

Looking for ideal T700 Carbon Fiber Plate Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Toray Carbon Fiber are quality guaranteed. We are China Origin Factory of 3k Carbon Fiber Sheets. If you have any question, please feel free to contact us.

Product detail pictures:

Related Product Guide:

Carbon fiber greatly improves the characteristics of special-shaped parts. At this stage, carbon fiber special-shaped products have many requirements in the fields of unmanned aircraft, auto parts, intelligent robots, etc. 2021 Good Quality Cut Cnc - T700/T300 3K Full Carbon Fiber Sheet – Feimoshi , The product will supply to all over the world, such as: Tajikistan, Mombasa, Israel, When cutting carbon fiber board, there are some tips to refer to. When cutting, you can mark it with a tool, and then widen the mark a little bit, so that you can leave enough space to sand the carbon fiber board a little, this way can avoid chips and debris, and make the edge of the carbon fiber board smoother, to further protect your own safety. After finishing the cut, there are also steps that can be taken to give a final polish to the cut edges. Buy some sanding blocks to sand the edges, or use sandpaper to smooth the edges.

Carbon Fibre Guitar Picks