English
2021 High quality Carbon Fiber Panel Sheet - CNC Cutting Carbon Fiber Plate For UAV Drones – Feimoshi Featured Image
  • 2021 High quality Carbon Fiber Panel Sheet - CNC Cutting Carbon Fiber Plate For UAV Drones – Feimoshi
  • 2021 High quality Carbon Fiber Panel Sheet - CNC Cutting Carbon Fiber Plate For UAV Drones – Feimoshi
  • 2021 High quality Carbon Fiber Panel Sheet - CNC Cutting Carbon Fiber Plate For UAV Drones – Feimoshi
  • 2021 High quality Carbon Fiber Panel Sheet - CNC Cutting Carbon Fiber Plate For UAV Drones – Feimoshi

2021 High quality Carbon Fiber Panel Sheet - CNC Cutting Carbon Fiber Plate For UAV Drones – Feimoshi


Product Detail

Product Tags

Related Video

Feedback (2)

After data comparison, it is obvious that there is a gap between the mechanical properties of carbon fiber and carbon fiber composite materials, but even so, the carbon fiber pipe made of carbon fiber composite material far exceeds the pressure bearing capacity of steel pipe. Carbon Fiber Oars, Carbon Fiber Drone Parts, Large Carbon Fiber Tubes, The production process of carbon fiber tubes is different, and the strength of the products produced is also different. Taking T700 carbon fiber and resin as raw materials and a carbon fiber tube made by winding molding process as an example, the carbon fiber tube with a size of 1.6*50*500mm is tested, and it can be found that the average compressive strength of the carbon fiber tube can reach 230MPa, which will occur when the load is exceeded. Brittle failure, the strength of the matrix determines the strength of the carbon fiber tube.In the tensile strength test of the carbon fiber tube, it was found that the carbon tube can withstand a tensile strength of more than 800MPa, and the maximum strain is 0.03, and the tensile resistance of the carbon tube is very good.Carbon fiber composite materials have many advantages such as light weight and high strength. Carbon fiber tubes can be made by winding, rolling, and pultrusion.
2021 High quality Carbon Fiber Panel Sheet - CNC Cutting Carbon Fiber Plate For UAV Drones – Feimoshi Detail:

Customized CNC Cutting Sheet Carbon Fiber Plate For UAV Drones

Carbon Fiber Plate/Sheet/Panel/Board:

1.They are made of the composite material fiberglass reinforced plastic, which is a non-homogenous mix of continuous fiberglass threading and a thermoplastic resin.

2.The fiberglass acts as a reinforcing agent that adds strength without adding much weight. Fiberglass is also chemical, rust and temperature resistant, non-conductive and non-magnetic.

Carbon Fiber Sheet Cutting process has sinker and chamfer, make the carbon parts beautiful, increase the overall drone aesthetic.

Any need of UAV woven full Carbon fiber Sheet, we will try our best to support you.

Surface: 3K twill matte/twill gloss

Finish: matte or glossy in both sides, twill or plain weave

Stock: twill matte 0.5-10.0mm carbon fiber plates in stock

Service: OEM & ODM, CNC Cutting Service And Logo Printing, Assemly and packing service

carbon fiber sheet cutting

FAQ

1) Which size do you have in stock?

400X500mm, 500X600mm in stock. Other size could be customized.

2) What is the thickness of carbon fiber plate?

About+/-0.1mm-0.2mm (More precise tolerance has the higher price)

3) There is the MOQ requirements for the carbon fiber plate?

No MOQ requirements for the carbon fiber sheet.

4) Do you offer the samples?

Yes, Free samples is ok for us.

5) Can you do  the chamfer or countersunk or other special cutting?

Yes, we are very good at doing the carbon fiber chamfer, carbon fiber countersunk and carbon fiber drilling.

Looking for ideal CNC Cutting Sheet Manufacturer & supplier? We have a wide selection at great prices to help you get creative. All the Plate For UAV Drones are quality guaranteed. We are China Origin Factory of Carbon Plate Cutting. If you have any question, please feel free to contact us.

Product detail pictures:

2021 High quality Carbon Fiber Panel Sheet - CNC Cutting Carbon Fiber Plate For UAV Drones – Feimoshi detail pictures

2021 High quality Carbon Fiber Panel Sheet - CNC Cutting Carbon Fiber Plate For UAV Drones – Feimoshi detail pictures

2021 High quality Carbon Fiber Panel Sheet - CNC Cutting Carbon Fiber Plate For UAV Drones – Feimoshi detail pictures

2021 High quality Carbon Fiber Panel Sheet - CNC Cutting Carbon Fiber Plate For UAV Drones – Feimoshi detail pictures

Related Product Guide:
Carbon fiber was produced in the early 1950s in response to the needs of cutting-edge science and technology such as rockets, aerospace and aviation, and is now widely used in sports equipment, textiles, chemical machinery and medicine. With the increasingly stringent requirements of cutting-edge technology on the technical performance of new materials, scientific and technological workers are constantly striving to improve. In the early 1980s, high-performance and ultra-high-performance carbon fibers appeared one after another, which was another leap in technology, and also marked that the research and production of carbon fibers had entered an advanced stage.​​ 2021 High quality Carbon Fiber Panel Sheet - CNC Cutting Carbon Fiber Plate For UAV Drones – Feimoshi , The product will supply to all over the world, such as: Madagascar, Finland, United Arab Emirates, Carbon fiber tube production process
    • Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces，a nice business partner.
    5 Stars By trameka milhouse from Slovakia - 2018.09.16 11:31
    The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
    5 Stars By Jill from Bangladesh - 2017.12.09 14:01

    Send your message to us:

    Write your message here and send it to us

    related products

    Send your message to us:

    Write your message here and send it to us
    Hit enter to search or ESC to close