English
Best quality Carbon Fiber Rod - 30x20mm custom carbon fiber octagonal square tube accessories – Feimoshi Featured Image
  • Best quality Carbon Fiber Rod - 30x20mm custom carbon fiber octagonal square tube accessories – Feimoshi
  • Best quality Carbon Fiber Rod - 30x20mm custom carbon fiber octagonal square tube accessories – Feimoshi

Best quality Carbon Fiber Rod - 30x20mm custom carbon fiber octagonal square tube accessories – Feimoshi


Product Detail

Product Tags

Related Video

Feedback (2)

Carbon fiber and carbon fiber tube have different pressure capacity. Why are carbon fiber and carbon fiber tubes different in pressure? This is because carbon fiber is not the same as carbon fiber composite material. Carbon fiber composite material is an intermediate material that is fused with carbon fiber and resin. In terms of performance, carbon fiber is much higher than carbon fiber composite materials, but carbon fiber cannot be used as a material alone. 1. Carbon fiber pressure bearing capacity: The tensile strength of carbon fiber material is 3530MPa, 1MPa=1N/mm2, which is 3530N/mm2, which means that it can withstand a force of 3530 Newtons on a cross section of 1 square millimeter, which is 353Kg. 2. The pressure-bearing capacity of carbon fiber composite materials: the carbon fiber tube with T700 grade, 1.6mm thickness, 50mm inner diameter and 500mm length is used for testing, and the measured tensile strength is about 230MPa, that is, the cross section of 1 square millimeter bears a force of 230 Newtons , which is 23Kg. Carbon Fiber Stand, Curved Carbon Fiber Tube, Carbon Fiber Opener, Carbon fiber has many high-quality properties. Carbon fiber has high radial strength and modulus, low relative density, high specific performance, no stress relaxation, high temperature and high pressure resistance in non-air oxidation natural environment, good fatigue resistance, specific heat capacity and electrical conductivity are in the non-metallic state. Among the materials and alloys, the linear expansion coefficient is small and has a variety of properties, good corrosion resistance, and good X-ray penetration. Excellent electrical conductivity and heat transfer performance, good magnetic shielding, etc.
Best quality Carbon Fiber Rod - 30x20mm custom carbon fiber octagonal square tube accessories – Feimoshi Detail:

Customized carbon fiber octagonal tube accessories

New upgrading Octagon carbon fiber boom types in stock: 20X30mm, 30X30mm(Length is 1000mm.) We could cut the different length according  to your detail requirements( Free cut length charge)

Thicknesss could do the 1.0mm, 1.5mm and 2.0mm or others. Octagon carbon fiber tube is more stable and professional than round carbon fiber tube.

These 3K Carbon Fiber Tubes Carbon are made of pure carbon fiber with beautiful twill or plain weave;

Customized specs are accepted, like Outer Diameter : 6mm, 8mm,10mm,12mm,14mm,16mm, 20mm, 22mm, 25mm, 30mm……350mm;

Thickness:

1mm, 1.5mm, 2 mm, 2.5mm, 3mm…..16mm ;any size can do for you .

2.Specifications

1) High temperature resistance carbon fiber tubes:100%carbon fiber ;

2) Light & high strength;

3) Good corrosion resistance;

Besides Carbon Fiber Tube, we also can support you with Full Carbon Fiber Sheet, shaped carbon fiber parts, carbon fiber prototyping, carbon fiber guitar, carbon fiber rc chassis and carbon fiber furniture and so on.

We have about ten years more experience in carbon fiber market. Assembly serivce and packing service is welcomed by most customers. Any other requirements, please don’t hesitate to contact us.

Welcome to quote

 

X class frame


Specification in common use

23mm*25mm*1000mm

20mm*22mm*1000mm

19.5mm*22mm*1000mm

18mm*20mm*1000mm

18mm*16mm*1000mm

14mm*16mm*1000mm

10mm*12mm*1000mm

8mm*10mm*1000mm

6mm*8mm*1000mm

can custom as per customer’s requires

FAQ

1) Do we need to make a mould for the shaped carbon fiber tube?

Yes, most of carbon fiber tube needs a mould to do it. And it will make the tube more straight and strength.

2) There is the moq requirements of shaped carbon fiber tube?

If you make the new mould for your project, the testing order is no moq for you.

3)When we decide to make the mould, it needs to make the payment for each order?

No, mould charge only need to pay one time. Ant the mould is only for you.

4) Could we sign the NDA?

Yes, it is ok for us. And it is also our duty to protect every customer’s design.

 

Looking for ideal Carbon Fiber Arms Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the X Class Frame are quality guaranteed. We are China Origin Factory of Big Carbon Fiber Drone. If you have any question, please feel free to contact us.

Product detail pictures:

Best quality Carbon Fiber Rod - 30x20mm custom carbon fiber octagonal square tube accessories – Feimoshi detail pictures

Best quality Carbon Fiber Rod - 30x20mm custom carbon fiber octagonal square tube accessories – Feimoshi detail pictures

Related Product Guide:
The main purpose of carbon fiber is to composite with resin, metal, ceramic and other matrix to make structural material. Carbon fiber reinforced epoxy resin composite materials have the highest specific strength and specific modulus comprehensive indicators among existing structural materials. In the fields with strict requirements such as density, stiffness, weight, fatigue properties, etc., in the occasions requiring high temperature and high chemical stability, carbon fiber composite materials have advantages.​​ Best quality Carbon Fiber Rod - 30x20mm custom carbon fiber octagonal square tube accessories – Feimoshi , The product will supply to all over the world, such as: Turkmenistan, Mexico, Greek, Molded carbon fiber square tube: The carbon fiber square tube is turned into a rectangular tube, and the prepreg layer is carried out through a rectangular mold. First, according to the size of the square tube, the mold is made, and the prepreg is cut, and then layer by layer. Lay the carbon fiber prepreg on top of the square tube, each layer of prepreg can complete a circle of the square tube, after the layup is completed, the mold is clamped and fixed, and then sent to the curing equipment to complete the curing, and so on. After that, the mold is disassembled, and the core mold is demolded to obtain a carbon fiber square tube.
    • A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
    5 Stars By Molly from Cyprus - 2018.11.06 10:04
    This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
    5 Stars By Stephen from Romania - 2018.06.12 16:22

    Send your message to us:

    Write your message here and send it to us

    related products

    Send your message to us:

    Write your message here and send it to us
    Hit enter to search or ESC to close