Factory wholesale Drone Frame - 2.0mm Twill matte CNC carbon fiber composite cutting opener mount – Feimoshi
Factory wholesale Drone Frame - 2.0mm Twill matte CNC carbon fiber composite cutting opener mount – Feimoshi Detail:
2.0mm Twill matte CNC carbon fiber composite cutting opener mount
400X500X2.0mm and 500X600X2.0mm 3K twill matte carbon fiber plate could be cut to different types. 2.0mm thickness is very suitable for the carbon fiber opener. Normally, we could do some stocked quantity for 2.0mm thickness. Carbon fiber sheet is made of 3K twill matte cloth and UD cloth and epoxy resin.
CNC cutting service is ok for us. If you feel that the edge is very sharp, we could do the chamfer for the edge to make it more professional. Also wanting to connect the hardware with carbon fiber parts, contact us freely. Our engineer team will offer some good suggestions for your choosing.
Product detail pictures:
Related Product Guide:
The molding methods of carbon fiber products mainly include two ways: First, the molding process, the molding is to place the carbon fiber material between the upper and lower molds, under the action of the pressure and temperature of the hydraulic press, the material fills the mold cavity and removes the residual Air, after a period of high temperature and high pressure, solidifies the resin in the carbon fiber material, and a carbon fiber product can be obtained after demolding. This process greatly reduces the production cost, and has high production efficiency, and is suitable for forming carbon fiber products with complex structures. Second, the autoclave forming process, the autoclave is a special container that can withstand and adjust the stability and pressure within a certain range. The carbon fiber prepreg is laid on the surface of the mold coated with mold release agent, and then covered with mold release cloth, suction felt, isolation film, and air felt in turn, sealed in a vacuum bag, and heated and cured in an autoclave. Before, it needs to be vacuumed to check the tightness, and then put into an autoclave for curing and molding under the action of high temperature and high pressure. This process is suitable for load-bearing structural parts that require high mechanical properties. Factory wholesale Drone Frame - 2.0mm Twill matte CNC carbon fiber composite cutting opener mount – Feimoshi , The product will supply to all over the world, such as: Seychelles, Mexico, Qatar, Health and Safety FAQ: Carbon fiber soot is non-toxic, but mildly irritating to the skin, eyes and lungs, just like glass fiber. We recommend that you wear a dust mask to try to avoid any itching or stinging, especially when cutting or sanding. Edges can be quite sharp, so rubber gloves are also important to prevent cuts and cuts.
By Hedy from Latvia - 2017.01.28 19:59
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By Natalie from Sri Lanka - 2018.06.21 17:11
Send your message to us:
Write your message here and send it to us