Fast delivery Rigid Carbon Fiber Plate - High strength customized matte or glossy 3K carbon fiber plate – Feimoshi

Send email to us

Product Detail

Product Tags

Feedback (2)

At present, the carbon fiber industry is in a period of explosive growth, and the growth rate of the carbon fiber demand market will remain at around 17% in the future. Thin Carbon Fiber Sheets, Carbon Fiber Canoe Paddle, Carbon Fiber Drone Parts, Carbon fiber can be divided into polythiophene-based carbon fiber, bitumen-based carbon fiber, viscose-based carbon fiber, phenolic resin-based carbon fiber, and gas chromatography-grown carbon fiber according to the source of raw materials; Model and very high solid model carbon fiber; divided into long filament, short fiber and chopped fiber according to the situation; divided into general-purpose and high-performance type according to structural mechanical properties. Universal carbon fiber has a strength of 1000Mpa and a modulus of up to 100GPa. High-performance carbon fiber is divided into high-strength type (strength 2000Mpa, modulus 250GPa) and high solid model (modulus above 300GPa). Those whose strength exceeds 4000Mpa are also called ultra-high-strength models; those whose modulus exceeds 450Gpa are called extremely high solid models. Along with the development trend of the aerospace and aerospace industries, high-strength and high-elongation carbon fibers have also been produced, with a tensile strength of more than 2%.

Fast delivery Rigid Carbon Fiber Plate - High strength customized matte or glossy 3K carbon fiber plate – Feimoshi Detail:

Product detail pictures:

Related Product Guide:

In the automotive industry, carbon fiber sheets are used to strengthen automotive components such as doors, hoods, bumpers, fenders and roof rails. Automakers often use steel to make these parts. Although less expensive, steel is much heavier than carbon fiber. To make vehicles such as race cars lighter, carbon fiber sheets are often used to replace many steel parts. Fast delivery Rigid Carbon Fiber Plate - High strength customized matte or glossy 3K carbon fiber plate – Feimoshi , The product will supply to all over the world, such as: Brunei, Cologne, Sierra Leone, When cutting carbon fiber board, there are some tips to refer to. When cutting, you can mark it with a tool, and then widen the mark a little bit, so that you can leave enough space to sand the carbon fiber board a little, this way can avoid chips and debris, and make the edge of the carbon fiber board smoother, to further protect your own safety. After finishing the cut, there are also steps that can be taken to give a final polish to the cut edges. Buy some sanding blocks to sand the edges, or use sandpaper to smooth the edges.

Blue Carbon Fiber Plate