OEM/ODM China Rectangular Carbon Fiber Tube - Twill glossy colorful carbon fiber pipe – Feimoshi
OEM/ODM China Rectangular Carbon Fiber Tube - Twill glossy colorful carbon fiber pipe – Feimoshi Detail:
Twill glossy colorful carbon fiber pipe
Twill glossy colorful carbon fiber pipe
There are many colors for our customers to choose. red, blue, purple and other colors
We have glossy and matte surfaces. For the weave, we have twill and plain
Our diameter range is from 6mm to 100mm and the wall thickness is 1mm to 3mm. if you need thicker, that is also ok
Product detail pictures:
Related Product Guide:
Carbon fiber and carbon fiber tube have different pressure capacity. Why are carbon fiber and carbon fiber tubes different in pressure? This is because carbon fiber is not the same as carbon fiber composite material. Carbon fiber composite material is an intermediate material that is fused with carbon fiber and resin. In terms of performance, carbon fiber is much higher than carbon fiber composite materials, but carbon fiber cannot be used as a material alone. 1. Carbon fiber pressure bearing capacity: The tensile strength of carbon fiber material is 3530MPa, 1MPa=1N/mm2, which is 3530N/mm2, which means that it can withstand a force of 3530 Newtons on a cross section of 1 square millimeter, which is 353Kg. 2. The pressure-bearing capacity of carbon fiber composite materials: the carbon fiber tube with T700 grade, 1.6mm thickness, 50mm inner diameter and 500mm length is used for testing, and the measured tensile strength is about 230MPa, that is, the cross section of 1 square millimeter bears a force of 230 Newtons , which is 23Kg. OEM/ODM China Rectangular Carbon Fiber Tube - Twill glossy colorful carbon fiber pipe – Feimoshi , The product will supply to all over the world, such as: Morocco, Berlin, Vietnam, There are many kinds of carbon fiber tube production processes, such as winding molding, pultrusion molding, compression molding, roll molding, autoclave molding, air bag molding, etc., carbon fiber tubes with different needs often use different production processes. Common square tube molding and round tube rolling. The carbon fiber prepreg is used here, minus the impregnation process. Can improve production efficiency.
By Gemma from Poland - 2018.07.26 16:51
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Erica from Pakistan - 2018.12.25 12:43
Send your message to us:
Write your message here and send it to us