China wholesale Carbon Fiber Pipe - custom 15mm 3K twill matte carbon fiber tubes – Feimoshi
China wholesale Carbon Fiber Pipe - custom 15mm 3K twill matte carbon fiber tubes – Feimoshi Detail:
custom 15mm 3K twill matte Carbon Fiber Tubes
Carbon tube/pipe features:
1. Introduction
These 3K Carbon Fiber Tube are made of pure carbon fiber with beautiful twill or plain weave; Available in different colors and sizes( usually 3K twill matte); Customized Round carbon fiber tubes specs are accepted,like Outer Diameter :6mm,8mm,10mm,12mm,14mm,16mm20mm,22mm,25mm,30mm……350mm;
Customized Shaped Full Carbon Fiber Tube: such as: 20X30mm, 30X30mm or others. Thickness: 1.0mm, 1.5mm, 2.0mm or other thickness.
Square carbon fiber tube: 10X10mm, 15X15mm, 18X18mm, 20X20mm, 30X30mm square carbon fiber tube(These tubes have the mould by us)
Recently we upgrade our machines to improve the carbon fiber tube precision.
Most precise tolerance shaped carbon fiber tubes for us.
2. Specifications
1) High temperature resistance carbon fiber tubes :100%carbon fiber ;
2) Light & high strength;
3) Good corrosion resistance;
The carbon fiber tube is light in weight and high in strength. It can be applied to different parts of the drone body during design and assembly, such as the arm and wing frame. Compared with aluminum alloy material, it can increase the weight reduction effect by 30%, which can improve the aircraft, endurance and increase load capacity. The carbon fiber material itself has high tensile strength, energy absorption, shock resistance, and good corrosion resistance, which also extend the service life of the UAV.
Product picture
Looking for ideal 15mm Matte Carbon Fiber Tubes Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the 15mm Twill Matte Carbon Fiber Tubes are quality guaranteed. We are China Origin Factory of Custom 3K Carbon Fiber Tubes. If you have any question, please feel free to contact us.
Product detail pictures:
Related Product Guide:
Carbon fiber was produced in the early 1950s in response to the needs of cutting-edge science and technology such as rockets, aerospace and aviation, and is now widely used in sports equipment, textiles, chemical machinery and medicine. With the increasingly stringent requirements of cutting-edge technology on the technical performance of new materials, scientific and technological workers are constantly striving to improve. In the early 1980s, high-performance and ultra-high-performance carbon fibers appeared one after another, which was another leap in technology, and also marked that the research and production of carbon fibers had entered an advanced stage. China wholesale Carbon Fiber Pipe - custom 15mm 3K twill matte carbon fiber tubes – Feimoshi , The product will supply to all over the world, such as: Thailand, Nicaragua, Qatar, When cutting carbon fiber board, there are some tips to refer to. When cutting, you can mark it with a tool, and then widen the mark a little bit, so that you can leave enough space to sand the carbon fiber board a little, this way can avoid chips and debris, and make the edge of the carbon fiber board smoother, to further protect your own safety. After finishing the cut, there are also steps that can be taken to give a final polish to the cut edges. Buy some sanding blocks to sand the edges, or use sandpaper to smooth the edges.
By Laura from St. Petersburg - 2017.08.16 13:39
The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
By Bess from El Salvador - 2018.06.19 10:42
