colored carbon fiber tube - Manufacturers, Factory, Suppliers from China

The main purpose of carbon fiber is to composite with resin, metal, ceramic and other matrix to make structural material. Carbon fiber reinforced epoxy resin composite materials have the highest specific strength and specific modulus comprehensive indicators among existing structural materials. In the fields with strict requirements such as density, stiffness, weight, fatigue properties, etc., in the occasions requiring high temperature and high chemical stability, carbon fiber composite materials have advantages.​​ colored carbon fiber tube, Rectangular Carbon Fiber Tube, Carbon Fiber Keyboard, Carbon Fiber Longboard,Composite Cut. The production process of carbon fiber tubes is different, and the strength of the products produced is also different. Taking T700 carbon fiber and resin as raw materials and a carbon fiber tube made by winding molding process as an example, the carbon fiber tube with a size of 1.6*50*500mm is tested, and it can be found that the average compressive strength of the carbon fiber tube can reach 230MPa, which will occur when the load is exceeded. Brittle failure, the strength of the matrix determines the strength of the carbon fiber tube.In the tensile strength test of the carbon fiber tube, it was found that the carbon tube can withstand a tensile strength of more than 800MPa, and the maximum strain is 0.03, and the tensile resistance of the carbon tube is very good.Carbon fiber composite materials have many advantages such as light weight and high strength. Carbon fiber tubes can be made by winding, rolling, and pultrusion. The product will supply to all over the world, such as Europe, America, Australia,Venezuela, Thailand,Argentina, Bangladesh.Carbon Fiber Forming: Carbon fiber sheets made of epoxy glue are not thermoset (thermoformable) - the finished sheet cannot be heated and bent to maintain the bent shape. Carbon fiber laminate does not stretch easily like plastic. You can get very insufficient permanent index of refraction in an orientation above high fever, but because of this difficulty, we do not strongly recommend the application. Molded pieces are possible, but the carbon fiber fabric must be stored in the mold and the epoxy glue introduced prior to the heating/drying process.

Related Products