Factory wholesale Drone Frame - 3K CNC carbon fiber cutting opener part for composite frame – Feimoshi
Factory wholesale Drone Frame - 3K CNC carbon fiber cutting opener part for composite frame – Feimoshi Detail:
3K CNC carbon fiber cutting opener part for composite frame
3K full carbon fiber sheet is made of carbon fiber cloth, UD cloth and eposy resin. Normally, 3K full carbon fiber plate is popular in the market. It could do many different types according to your designs.
We could help you to CNC cut the composite frame. Carbon fiber opener, carbon fiber FPV frame, carbon fiber car chassis and carbon fiber rc parts, ect. are all avaliable for us.
Also colored carbon fiber sheet, forged carbon fiber plate and carbon fiber plate with all 3K layers could be customized.
Meantime, we do many 400X500mm and 500X600mm carbon fiber plate in stock.
600X800mm, 800X1000mm and 1000X1500mm could be produced.
Do you want to do your own frame? Any interests, contact us freely.
PS: Logo service, Packing service and Assembly service are avaliable for us.
Product detail pictures:
Related Product Guide:
The molding methods of carbon fiber products mainly include two ways: First, the molding process, the molding is to place the carbon fiber material between the upper and lower molds, under the action of the pressure and temperature of the hydraulic press, the material fills the mold cavity and removes the residual Air, after a period of high temperature and high pressure, solidifies the resin in the carbon fiber material, and a carbon fiber product can be obtained after demolding. This process greatly reduces the production cost, and has high production efficiency, and is suitable for forming carbon fiber products with complex structures. Second, the autoclave forming process, the autoclave is a special container that can withstand and adjust the stability and pressure within a certain range. The carbon fiber prepreg is laid on the surface of the mold coated with mold release agent, and then covered with mold release cloth, suction felt, isolation film, and air felt in turn, sealed in a vacuum bag, and heated and cured in an autoclave. Before, it needs to be vacuumed to check the tightness, and then put into an autoclave for curing and molding under the action of high temperature and high pressure. This process is suitable for load-bearing structural parts that require high mechanical properties. Factory wholesale Drone Frame - 3K CNC carbon fiber cutting opener part for composite frame – Feimoshi , The product will supply to all over the world, such as: Algeria, Mombasa, Mongolia, Cutting Carbon Fiber Laminates: Carbon fiber plastic sheets can be cut with standard tools ranging from scissors and razor blades to thinner plastic sheets, milled cut-off wheels and dremel tools. For cutting many carbon fiber double plates, we propose to use carbide cutting tools, wear-resistant material type cutting machines or diamond film-forming tools. Basic steel tools can cut carbon plates, but because of the breakage characteristics of all aluminum alloy plates, standard tools can quickly break down in extra-heavy cutting applications. The control panel can then be simply sanded and polished, allowing you to trim the close and sanded edges to final specifications to maintain a clean, uncluttered edge.
By Odelette from Czech republic - 2018.06.12 16:22
Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
By Lee from America - 2018.10.31 10:02
Send your message to us:
Write your message here and send it to us
