Manufacturer for Drill Carbon Pipe - High quality Light weight 100% 3k glossy twill customized size carbon fiber tube – Feimoshi
Manufacturer for Drill Carbon Pipe - High quality Light weight 100% 3k glossy twill customized size carbon fiber tube – Feimoshi Detail:
Product detail pictures:
Related Product Guide:
Carbon fiber and carbon fiber tube have different pressure capacity. Why are carbon fiber and carbon fiber tubes different in pressure? This is because carbon fiber is not the same as carbon fiber composite material. Carbon fiber composite material is an intermediate material that is fused with carbon fiber and resin. In terms of performance, carbon fiber is much higher than carbon fiber composite materials, but carbon fiber cannot be used as a material alone. 1. Carbon fiber pressure bearing capacity: The tensile strength of carbon fiber material is 3530MPa, 1MPa=1N/mm2, which is 3530N/mm2, which means that it can withstand a force of 3530 Newtons on a cross section of 1 square millimeter, which is 353Kg. 2. The pressure-bearing capacity of carbon fiber composite materials: the carbon fiber tube with T700 grade, 1.6mm thickness, 50mm inner diameter and 500mm length is used for testing, and the measured tensile strength is about 230MPa, that is, the cross section of 1 square millimeter bears a force of 230 Newtons , which is 23Kg. Manufacturer for Drill Carbon Pipe - High quality Light weight 100% 3k glossy twill customized size carbon fiber tube – Feimoshi , The product will supply to all over the world, such as: Gambia, kazan, Sheffield, Molded carbon fiber square tube: The carbon fiber square tube is turned into a rectangular tube, and the prepreg layer is carried out through a rectangular mold. First, according to the size of the square tube, the mold is made, and the prepreg is cut, and then layer by layer. Lay the carbon fiber prepreg on top of the square tube, each layer of prepreg can complete a circle of the square tube, after the layup is completed, the mold is clamped and fixed, and then sent to the curing equipment to complete the curing, and so on. After that, the mold is disassembled, and the core mold is demolded to obtain a carbon fiber square tube.
By Lulu from Algeria - 2017.08.16 13:39
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Pearl from Azerbaijan - 2017.03.07 13:42
Send your message to us:
Write your message here and send it to us