Structural Carbon Fiber - Factory, Suppliers, Manufacturers from China

The molding methods of carbon fiber products mainly include two ways: First, the molding process, the molding is to place the carbon fiber material between the upper and lower molds, under the action of the pressure and temperature of the hydraulic press, the material fills the mold cavity and removes the residual Air, after a period of high temperature and high pressure, solidifies the resin in the carbon fiber material, and a carbon fiber product can be obtained after demolding. This process greatly reduces the production cost, and has high production efficiency, and is suitable for forming carbon fiber products with complex structures. Second, the autoclave forming process, the autoclave is a special container that can withstand and adjust the stability and pressure within a certain range. The carbon fiber prepreg is laid on the surface of the mold coated with mold release agent, and then covered with mold release cloth, suction felt, isolation film, and air felt in turn, sealed in a vacuum bag, and heated and cured in an autoclave. Before, it needs to be vacuumed to check the tightness, and then put into an autoclave for curing and molding under the action of high temperature and high pressure. This process is suitable for load-bearing structural parts that require high mechanical properties. Structural Carbon Fiber, Carbon Fiber Sheet, Carbon Fiber Structural Shapes, Carbon Fiber Bracket,Carbon Fiber Folding Table. Carbon fiber (carbon fiber, commonly known as CF) is a new fiber raw material with high strength and high modulus fiber with a carbon content of more than 95%. It is made of bulk high-purity graphite nanocrystalline and other organic chemical fibers piled up along the radial direction of the fiber, and is a nanocrystalline graphite material obtained by carbonization and graphitization. Carbon fiber is "soft with rigidity", its weight is lighter than that of metal aluminum, but its strength exceeds that of steel, and it has the characteristics of corrosion resistance and high modulus. It is a key raw material for national defense, military industry and civilian use. It not only has the original intrinsic characteristics of carbon materials, but also has the soft and processable properties of textile fibers. It is a new generation of improved fibers. The product will supply to all over the world, such as Europe, America, Australia,Brasilia, Amman,Brazil, Swedish.Carbon fiber board can directly process flat parts, which is relatively simple. In the design, it is best to use a comprehensive molding design structure to optimize the structure as much as possible. Because carbon fiber composites have poor toughness and are not resistant to mechanical friction, metal connections are usually required to achieve combined structures between parts.

Related Products