English
2021 High quality Octagonal Composite Tube - 3K round full carbon fiber boom with red marked circle logo – Feimoshi Featured Image
  • 2021 High quality Octagonal Composite Tube - 3K round full carbon fiber boom with red marked circle logo – Feimoshi
  • 2021 High quality Octagonal Composite Tube - 3K round full carbon fiber boom with red marked circle logo – Feimoshi
  • 2021 High quality Octagonal Composite Tube - 3K round full carbon fiber boom with red marked circle logo – Feimoshi
  • 2021 High quality Octagonal Composite Tube - 3K round full carbon fiber boom with red marked circle logo – Feimoshi

2021 High quality Octagonal Composite Tube - 3K round full carbon fiber boom with red marked circle logo – Feimoshi


Product Detail

Product Tags

Related Video

Feedback (2)

In the automotive industry, carbon fiber sheets are used to strengthen automotive components such as doors, hoods, bumpers, fenders and roof rails. Automakers often use steel to make these parts. Although less expensive, steel is much heavier than carbon fiber. To make vehicles such as race cars lighter, carbon fiber sheets are often used to replace many steel parts. Chamfering Carbon Fiber Cut, Carbon Fiber Ruler, Rc Frame, When the carbon fiber tube is formed by continuous high temperature drying and forming through a splicing machine or an autoclave, the surface must be processed with sandpaper or grinding equipment. The purpose of this step is to make the surface of the carbon fiber tube tend to be uniform. flat. After grinding, there will be a lot of debris on the surface of the carbon fiber tube. You can choose tap water or detergent to remove the debris on the surface.
2021 High quality Octagonal Composite Tube - 3K round full carbon fiber boom with red marked circle logo – Feimoshi Detail:

3K round full carbon fiber boom with red marked circle logo

Features: 3K carbon fiber tube, 100% new, high quality.

High strength and wide application range

Can be used for: frame arm, landing gear, diy drone

Specification: 4 mm 5 mm 6 mm 7 mm 8 mm 9 mm 10 mm…..130mm 150mm ect.

Our tube is roll tube, not pultrusion tube, roll tube was have the longitude and weft yarn, but pultrusion tube only have the longitude, not weft yarn,

so, the strength not as well as roll tubes.

Carbon fiber is very light weight, the strength is steel’s 9 times, but weight was about 1/3 of steel!
My company Specializing in the production of carbon fiber tubes, carbon fiber plates and so on which could be widely used in your Product,

Whatever Quality or price are all attractive.
If you need to Carbon Fiber Tube Related Product You can contact us .
Purchasing the 3K carbon fiber Tube/shaft from Manufacturer-Factory directly. You can buy a high quality products with reasonable price.

Carbon fiber round tube

Product detail pictures:

2021 High quality Octagonal Composite Tube - 3K round full carbon fiber boom with red marked circle logo – Feimoshi detail pictures

2021 High quality Octagonal Composite Tube - 3K round full carbon fiber boom with red marked circle logo – Feimoshi detail pictures

2021 High quality Octagonal Composite Tube - 3K round full carbon fiber boom with red marked circle logo – Feimoshi detail pictures

2021 High quality Octagonal Composite Tube - 3K round full carbon fiber boom with red marked circle logo – Feimoshi detail pictures

Related Product Guide:
4. Its maintenance function is good. Carbon fiber material is waterproof, resistant to high temperature, ultra-low temperature, and abrasion, and can be used in all harsh environments. 2021 High quality Octagonal Composite Tube - 3K round full carbon fiber boom with red marked circle logo – Feimoshi , The product will supply to all over the world, such as: Bhutan, Portland, Liberia, When cutting carbon fiber board, there are some tips to refer to. When cutting, you can mark it with a tool, and then widen the mark a little bit, so that you can leave enough space to sand the carbon fiber board a little, this way can avoid chips and debris, and make the edge of the carbon fiber board smoother, to further protect your own safety. After finishing the cut, there are also steps that can be taken to give a final polish to the cut edges. Buy some sanding blocks to sand the edges, or use sandpaper to smooth the edges.
    • This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
    5 Stars By Louise from French - 2017.09.30 16:36
    We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
    5 Stars By Caroline from Sao Paulo - 2017.11.20 15:58

    Send your message to us:

    Write your message here and send it to us

    related products

    Send your message to us:

    Write your message here and send it to us
    Hit enter to search or ESC to close