English
Chinese wholesale Drill Carbon - 3K Laser cutting full carbon fiber sheet using in structural – Feimoshi Featured Image
  • Chinese wholesale Drill Carbon - 3K Laser cutting full carbon fiber sheet using in structural – Feimoshi
  • Chinese wholesale Drill Carbon - 3K Laser cutting full carbon fiber sheet using in structural – Feimoshi
  • Chinese wholesale Drill Carbon - 3K Laser cutting full carbon fiber sheet using in structural – Feimoshi
  • Chinese wholesale Drill Carbon - 3K Laser cutting full carbon fiber sheet using in structural – Feimoshi

Chinese wholesale Drill Carbon - 3K Laser cutting full carbon fiber sheet using in structural – Feimoshi


Product Detail

Product Tags

Related Video

Feedback (2)

The molding methods of carbon fiber products mainly include two ways: First, the molding process, the molding is to place the carbon fiber material between the upper and lower molds, under the action of the pressure and temperature of the hydraulic press, the material fills the mold cavity and removes the residual Air, after a period of high temperature and high pressure, solidifies the resin in the carbon fiber material, and a carbon fiber product can be obtained after demolding. This process greatly reduces the production cost, and has high production efficiency, and is suitable for forming carbon fiber products with complex structures. Second, the autoclave forming process, the autoclave is a special container that can withstand and adjust the stability and pressure within a certain range. The carbon fiber prepreg is laid on the surface of the mold coated with mold release agent, and then covered with mold release cloth, suction felt, isolation film, and air felt in turn, sealed in a vacuum bag, and heated and cured in an autoclave. Before, it needs to be vacuumed to check the tightness, and then put into an autoclave for curing and molding under the action of high temperature and high pressure. This process is suitable for load-bearing structural parts that require high mechanical properties. Carbon Fiber Structural Component, Structural Carbon Fiber, Carbon Fiber Countersunk, The specific disadvantage of carbon fiber is that it has poor impact resistance and is very easy to damage. Air oxidation occurs under the effect of strong alkali. The induced electromotive force of carbon fiber is coincident, while the induced electromotive force of aluminum alloy profiles is negative. When the carbon fiber composite material is used in combination with the aluminum profile, the carbonization, nitriding and electrochemical reaction of the metal material will occur. Therefore, carbon fiber must be surface treated before application.
Chinese wholesale Drill Carbon - 3K Laser cutting full carbon fiber sheet using in structural – Feimoshi Detail:

3K Laser cutting full carbon fiber sheet using in structural

About the 3k twill matte Carbon Fiber Sheet,it is stronger and lighter.

Normally we have the thickness from 0.3mm to 30.0mm,especially we are strong in the field of CNC Carbon Fiber Cutting Service.

Our normal stock including full carbon fiber sheet(400X500mm, 500X600mm), carbon fiber round tube(Various OD and ID), carbon fiber octagon tube(20X30mm, 30X30mm), carbon fiber square tube(10X10mm, 18X18mm, 20X20mm, 25X25mm, 30X30mm), carbon fiber curved tube(22mm and 25mm).

CNC carbon fiber customized cutting is possible to process complex surfaces that are difficult to be machined by conventional methods, and can even process some unobservable parts.

Carbon fiber sheet cutting

FAQ

1) Could we order one set frame?

Yes, normally, we make the quotation according to the whole plate(400X500mm or 500X600mm). It will be more competieve price based on the quantity in whole plate.

2)Do you do the carbon fiber chamfer and carbon fiber countersunk?

Yes, we have many years experience for the chamfer and countersunk.(DXF, DWG, Step format)

3)Could you do the forged plate?

Yes, forged plate is the new material. We would like to try to offer the perfect plates.

4)Do you help us to check the drawing’s hole size?

Yes, our engineer will check the drawings when cutting.

5)How many days for the cutting and plate?

Normally, it needs about 7-15 working days to complete it. Also we have to promise the quality 100%.

Looking for ideal 3.0mm Carbon Fiber Sheet Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the 4.5mm Carbon Fiber Sheet are quality guaranteed. We are China Origin Factory of 5.0mm Carbon Fiber Sheet. If you have any question, please feel free to contact us.

Product detail pictures:

Chinese wholesale Drill Carbon - 3K Laser cutting full carbon fiber sheet using in structural – Feimoshi detail pictures

Chinese wholesale Drill Carbon - 3K Laser cutting full carbon fiber sheet using in structural – Feimoshi detail pictures

Chinese wholesale Drill Carbon - 3K Laser cutting full carbon fiber sheet using in structural – Feimoshi detail pictures

Chinese wholesale Drill Carbon - 3K Laser cutting full carbon fiber sheet using in structural – Feimoshi detail pictures

Related Product Guide:
At present, the carbon fiber industry is in a period of explosive growth, and the growth rate of the carbon fiber demand market will remain at around 17% in the future. Chinese wholesale Drill Carbon - 3K Laser cutting full carbon fiber sheet using in structural – Feimoshi , The product will supply to all over the world, such as: Seychelles, Mexico, Zambia, Disadvantages of carbon fiber frames: (1) Complicated internal stress calculation; carbon fiber frame is composed of carbon fiber, which is characterized by strong tensile strength, but weak breaking compressive strength. Rigidity), the carbon fiber sheet is re-formed according to the calculation. The production and processing technology varies from manufacturer to manufacturer. It is important to select products from reliable manufacturers with work experience.(2). It is difficult to change the specifications; it is difficult to change the specifications because the molds are formed after forming. There is no way to correspond to order information of multiple specifications and styles.(3). Aging; will the application of epoxy resin cause aging? This is a study of the subject of beings, and it will slowly turn white when placed under the sun. Naturally this situation is related to the technicality of the manufacturer. Try not to place it in the sun.
    • We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
    5 Stars By Nicola from French - 2017.01.28 19:59
    As a veteran of this industry, we can say that the company can be a leader in the industry, select them is right.
    5 Stars By Joyce from Karachi - 2017.11.01 17:04

    Send your message to us:

    Write your message here and send it to us

    related products

    Send your message to us:

    Write your message here and send it to us
    Hit enter to search or ESC to close