colorful carbon fiber pipes - Manufacturers, Suppliers, Factory from China

Carbon fiber and carbon fiber tube have different pressure capacity. Why are carbon fiber and carbon fiber tubes different in pressure? This is because carbon fiber is not the same as carbon fiber composite material. Carbon fiber composite material is an intermediate material that is fused with carbon fiber and resin. In terms of performance, carbon fiber is much higher than carbon fiber composite materials, but carbon fiber cannot be used as a material alone. 1. Carbon fiber pressure bearing capacity: The tensile strength of carbon fiber material is 3530MPa, 1MPa=1N/mm2, which is 3530N/mm2, which means that it can withstand a force of 3530 Newtons on a cross section of 1 square millimeter, which is 353Kg. 2. The pressure-bearing capacity of carbon fiber composite materials: the carbon fiber tube with T700 grade, 1.6mm thickness, 50mm inner diameter and 500mm length is used for testing, and the measured tensile strength is about 230MPa, that is, the cross section of 1 square millimeter bears a force of 230 Newtons , which is 23Kg. colorful carbon fiber pipes, Diy Carbon Fiber Tube, Carbon Fiber Keyboard Case, Cut Carbon Fiber Sheet,Customized Composite Part. Carbon fiber has many high-quality properties. Carbon fiber has high radial strength and modulus, low relative density, high specific performance, no stress relaxation, high temperature and high pressure resistance in non-air oxidation natural environment, good fatigue resistance, specific heat capacity and electrical conductivity are in the non-metallic state. Among the materials and alloys, the linear expansion coefficient is small and has a variety of properties, good corrosion resistance, and good X-ray penetration. Excellent electrical conductivity and heat transfer performance, good magnetic shielding, etc. The product will supply to all over the world, such as Europe, America, Australia,Canada, Seychelles,Czech, Ukraine.Carbon fiber board mainly has the following characteristics:1. Light weight and high toughness. The weight of carbon fiber board is similar to that of plastic of the same volume, which is 20% of that of steel. Although it is light, its toughness is comparable to that of steel. It can be bent and coiled.2. High tensile coefficient. The tensile coefficient of carbon fiber is several times higher than that of steel, and it has good resistance to deformation, so carbon fiber boards are used in concrete reinforcement, bridge reinforcement and other places.3. Good chemical stability. Carbon fiber board base material is carbon element, carbon element has good chemical stability, and has the characteristics of corrosion resistance, acid and alkali resistance, wear resistance and so on.

Related Products