Carbon Fiber Plate Frame - Manufacturers, Factory, Suppliers from China

Carbon fiber and carbon fiber tube have different pressure capacity. Why are carbon fiber and carbon fiber tubes different in pressure? This is because carbon fiber is not the same as carbon fiber composite material. Carbon fiber composite material is an intermediate material that is fused with carbon fiber and resin. In terms of performance, carbon fiber is much higher than carbon fiber composite materials, but carbon fiber cannot be used as a material alone. 1. Carbon fiber pressure bearing capacity: The tensile strength of carbon fiber material is 3530MPa, 1MPa=1N/mm2, which is 3530N/mm2, which means that it can withstand a force of 3530 Newtons on a cross section of 1 square millimeter, which is 353Kg. 2. The pressure-bearing capacity of carbon fiber composite materials: the carbon fiber tube with T700 grade, 1.6mm thickness, 50mm inner diameter and 500mm length is used for testing, and the measured tensile strength is about 230MPa, that is, the cross section of 1 square millimeter bears a force of 230 Newtons , which is 23Kg. Carbon Fiber Plate Frame, Drill Carbon Pipe, Chamfering Carbon Fiber Cut, Carbon Fiber Panel,Carbon Fiber Cutting Part. The advantages of carbon fiber products are:1. High strength, light weight, do not spend a lot of manpower and material resources when handling.2. The tensile strength, flexural strength and flexural modulus are all very high, and they are not deformed within a certain range.3. Good pressure resistance and toughness.4. Good wear resistance, black carbon fiber tube factory, you can rest assured that it is in contact with other items, without worrying about wear and deformation.5. The chemical performance is stable, and it is not corroded by acid, alkali and salt. The product will supply to all over the world, such as Europe, America, Australia,Eindhoven, New Delhi,Greenland, South Africa.Carbon fiber tube production process

Related Products