OEM manufacturer Carbon Fiber Monopod - 3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels – Feimoshi
OEM manufacturer Carbon Fiber Monopod - 3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels – Feimoshi Detail:
3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels
Carbon fiber plates are made from high-quality carbon fiber material, our carbon fiber sheets panels are durable, high quality, and affordable.
1. All our carbon fiber sheets are made with 100% real carbon fiber prepreg cloth. Varieties of carbon fiber sheets can be offered to meet different requirements.
2. Each sheet is hand finished and inspected. Special materials and processes ensure the flawless gloss on both sides.
3. Different thicknesses and sizes for choosing :
Size :400×500 ;500×500; 500x600mm thickness :0.3-20mm
FAQ
1) Do you make the T300/T700 carbon fiber plate?
Yes, our normal plate is Toray T300 full carbon fiber plate.
2) T700 is stronger than T300?
Normally, T300 plate is strong enough for the FPV drone.
Also some customers perfers the T700 plate. It is up to your choice.
3) Could we do the CNC cutting service?
Yes, CNC cutting, chamfer and countersunk are all ok.
4) How many days for the production time?
About 7-15 working days based on the drawings’ comprehensive.
5) Sample for testing is avaliable?
Of course, you could make the bulk order. And we will make the free sample for your testing.
Product detail pictures:
Related Product Guide:
Carbon fiber and carbon fiber tube have different pressure capacity. Why are carbon fiber and carbon fiber tubes different in pressure? This is because carbon fiber is not the same as carbon fiber composite material. Carbon fiber composite material is an intermediate material that is fused with carbon fiber and resin. In terms of performance, carbon fiber is much higher than carbon fiber composite materials, but carbon fiber cannot be used as a material alone. 1. Carbon fiber pressure bearing capacity: The tensile strength of carbon fiber material is 3530MPa, 1MPa=1N/mm2, which is 3530N/mm2, which means that it can withstand a force of 3530 Newtons on a cross section of 1 square millimeter, which is 353Kg. 2. The pressure-bearing capacity of carbon fiber composite materials: the carbon fiber tube with T700 grade, 1.6mm thickness, 50mm inner diameter and 500mm length is used for testing, and the measured tensile strength is about 230MPa, that is, the cross section of 1 square millimeter bears a force of 230 Newtons , which is 23Kg. OEM manufacturer Carbon Fiber Monopod - 3K Twill Woven Matte Cnc Cutting Carbon Fiber Panels – Feimoshi , The product will supply to all over the world, such as: Spain, Iraq, Spain, In general, grinding and filing can grind the edges of sharp carbon fiber boards to a smooth appearance. However, if the fiberboard is exposed to harsh environments for a long time, such as marine environments, a two-part epoxy laminate is used to seal the edges.According to the different divisions of carbon fiber precursors, there are generally pitch-based carbon fiber cloth, PAN-based carbon fiber cloth, and viscose-based carbon fiber cloth.Second, according to different specifications, it can be divided into 1K, 3K, 6K, 12K and 24K and above carbon fiber cloth.Third, according to different carbonization, it can also be divided into graphitized carbon fiber cloth, (this carbon fiber cloth can withstand high temperature of 2,000 to 3,000), carbon fiber cloth (can cope with high temperature of about 1,000 degrees), and pre-oxidized carbon fiber cloth (can Resist the high temperature of 200~3 Baidu).Fourth, according to different manufacturing methods, subsequent divisions can be performed. Woven carbon fiber cloth, generally two-dimensional cloth, three-dimensional cloth and three-dimensional woven cloth, etc.; carbon fiber prepreg cloth, including dry and wet prepreg cloth; carbon fiber non-woven fabric, non-woven fabric, also known as chopped strand mat, Continuous felt, surface felt, stitched felt, etc.
By Grace from Vietnam - 2018.06.21 17:11
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Jason from New Zealand - 2017.08.21 14:13
